[1] Clemens H. and Mayer S., Advanced intermetallic TiAl alloys. Materials Science Forum, 2017, 879, 113-118.
[2] Bewlay B.P., et al., TiAl alloys in commercial aircraft engines, Materials at High Temperatures, 2016, 33, 549-559.
[3] Kothari K., Radhakrishnan R., Wereley N.M., Advances in gamma titanium aluminides and their manufacturing techniques, Progress in Aerospace Sciences, 2012, 55, 1-16.
[4] Chen Y.Y., et al., Research on the hot precision processing of TiAl alloys, Materials Science Forum, 2009, 620, 407-412.
[5] Lapin J., TiAl-based alloys: Present status and future perspectives, in Metals, 2009: Hradec nad Moravicí.
[6] Paul J.D.H., Appel F., Work-hardening and recovery mechanisms in gamma-based titanium aluminides, Metall Mater Trans A 2003, 34, 2103-2111.
[7] Chen X., et al., Dynamic recrystallization behavior of the Ti–48Al–2Cr–2Nb alloy during isothermal hot deformation, Progress in Natural Science: Materials International, 2019, 29, 587-594.
[8] Shih D., Scarr G., High-Temperature deformation behavior of the γ alloy Ti-48Ai-2Cr-2Nb, MRS Online Proceedings Library, 1990, 213, 727-732.
[9] Usta M., et al., Thermo-mechanical grain refinement in gamma (g) based TiAl intermetallics, Materials Science and Engineering: A, 2003, 359, 168-177.
[10] Tian S., et al., Investigation on the microstructure evolution and dynamic recrystallization mechanisms of TiAl alloy at elevated temperature, Journal of Materials Research and Technology, 2021, 14, 968-984.
[11] Wang Y., et al., Grain refinement of a TiAl alloy by heat treatment through near gamma transformation, Journal Of Materials Science, 2001, 36, 4465 – 4468.
[12] Zhang S.Z., et al., Phase transformation and microstructure evolution of differently processed Ti-45Al-9Nb-Y alloy, Intermetallics, 2012, 31, 208-216.
[13] Voort, G.F.V., Handbook metallography and microstructurs Vol. 9, 2004, USA: ASM International.
[14] Li B.H., et al., Microstructure and mechanical properties of as-cast Ti–43Al–9V–0.3Y alloy, Journal of Alloys and Compounds, 2009, 473(1-2), 123-126.
[15] Tan Y., et al., Effect of solution heat treatment on the microstructure and hardness of theTi-48Al-2Cr-2Nb alloy prepared by electron beam smelting, Journal of Materials Engineering and Performance, 2021, 31, 1387–1396.
[16] Duan B., et al., History and development of γ-TiAl alloys and the effect of alloying elements on their phase transformations, Journal of Alloys and Compounds, 2022, 909.
[17] Genc O., Ünal R., Development of gamma titanium aluminide (γ-TiAl) alloys: A Review, Journal of Alloys and Compounds, 2022, 929.
[18] Appel F., et al., Recent progress in the development of gamma titanium aluminide alloys, Advance Engineering Materials, 2000, 3, 699-720.
[19] Baker I., Recovery, recrystallization and grain growth in ordered alloys, Intermetallics, 2000, 8(9-11) 1183-1196.
[20] Hu Q., et al., Hot deformation behavior and dynamic recrystallization mechanism of Ti-48Al-2Nb-2Cr alloy with near-γ microstructure, Journal of Alloys and Compounds, 2023, 945.
[21] Appel F., Mechanistic understanding of creep in gamma-base titanium aluminide alloys, Intermetallics, 2001, 9(10-11) 907-914.
[22] Appel F., Diffusion assisted dislocation climb in intermetallic gamma TiAl, Materials Science and Engineering: A, 2001, 317(1-2) 115-127.
