[1] Fu Y., Zhang Y.B., J. Chuan Jie, Svynarenko K., Liang C. H., Li T.J., Interfacial phase formation of Al-Cu bimetal by solid-liquid casting method, China Foundry, 2017, 14(3) 194–198, doi: 10.1007/s41230-017-6057-7.
[2] Guan F., Jiang W., Li G., Jiang H., Zhu J., Fan Z., Interfacial bonding mechanism and pouring temperature effect on Al/Cu bimetal prepared by a novel compound casting process, Materials Research Express, 2019, 6(9) 096529, doi: 10.1088/2053-1591/ab2d8f.
[3] Tavassoli S., Abbasi M., Tahavvori R., Controlling of IMCs layers formation sequence, bond strength and electrical resistance in Al-Cu bimetal compound casting process, Materials and Design, 2016, 108, 343–353, doi: 10.1016/j.matdes.2016.06.076.
[4] Liu G., Wang Q., Zhang L., Ye B., Jiang H., Ding W., Effects of melt-to-solid volume ratio and pouring temperature on microstructures and mechanical properties of Cu/Al bimetals in compound casting process, Metallurgical and Materials Transaction A, Physical Metallurgy and Materials Science, 2019, 50(1) 401–414, doi: 10.1007/s11661-018-4981-9.
[5] Kim I. K., Hong S. I., Effect of heat treatment on the bending behavior of tri-layered Cu/Al/Cu composite plates, Materials and Design, 2013, 47, 590–598, doi: 10.1016/j.matdes.2012.12.070.
[6] Liu T., Wang Q., Sui Y., Wang Q., Ding W., An investigation into interface formation and mechanical properties of aluminum-copper bimetal by squeeze casting, Materials and Design, 2016, 89, 1137–1146, doi: 10.1016/j.matdes.2015.10.072.
[7] Pintore M., Wölck J., Mittler T., Greß T., Tonn B., Volk W., Composite casting and characterization of Cu–Al bilayer compounds, International Journal of Metalcasting, 2020, 14, 155–166, doi: 10.1007/s40962-019-00344-x.
[8] Liang S. M., Schmid-Fetzer R., Thermodynamic assessment of the Al-Cu-Zn system, part II: Al-Cu binary system, Calphad: Computer Coupling of Phase Diagrams Thermochemistry., 2015, 51, 252–260, doi: 10.1016/j.calphad.2015.10.004.
[9] Hasasi S.A., Abbasi M., Hosseinipour S. J., Squeeze casting of aluminum–copper preform with regular lattice structure: effect of preform wall thickness on the interfacial microstructure and mechanical properties, International Journal of Metalcasting, 2025, 19 July accepted,
https://doi.org/10.1007/s40962-025-01683-8
[10] Ahmadzadeh S. S., Mirbagheri S. M. H., Microstructural and mechanical characterization of Al/Cu interface in a bimetallic composite produced by compound casting, Scientific Reports, 2024, 14(1) 1–13, doi: 10.1038/s41598-024-57849-7.
[11] Fromm A.C., Barienti K., Selmanovic A. et al., Oxygen-free compound casting of aluminum and copper in a silane-doped inert gas atmosphere: a new approach to increase thermal conductivity, International Journal of Metalcasting, 2023, 17(3) 2171–2183, doi: 10.1007/s40962-022-00910-w.
[12] Liu G., Wang Q., Zhang L., Ye B., Jiang H., Ding W., Effect of cooling rate on the microstructure and mechanical properties of Cu/Al bimetal fabricated by compound casting, Metallurgical and Materials Transaction A, Physical Metallurgy and Materials Science, 2018, 49(2) 661–672, doi: 10.1007/s11661-017-4427-9.
[13] Ghomashchi M.R., Vikhrov A., Squeeze casting: an overview, Journal of Materials Processing Technology, 2000, 101 (1-3) 1–9,doi:10.1016/S0924-0136(99)00291-5.
[14] Zhao J. W., Sen Wu S., Microstructure and mechanical properties of rheo-diecasted A390 alloy, Transactions of Nonferrous Metals Society of China, 2010, 20, SUPPL. 3, s754–s757, doi: 10.1016/S1003-6326(10)60576-6.
[15] Amin K.M., Mufti N.A., Investigating cooling curve profile and microstructure of a squeeze cast Al–4%Cu alloy, Journal of Materials Processing Technology, 2012, 212(8) 1631–1639, doi: 10.1016/j.jmatprotec.2012.02.017.
[16] Maleki A., Niroumand B., Shafyei A., Effects of squeeze casting parameters on density, macrostructure and hardness of LM13 alloy, Materials Science and Engineering: A, 2006, 428(1) 135–140, doi: 10.1016/j.msea.2006.04.099.
[17] Patel M. G.C., Parasad K., Parappagoudar M.B., An intelligent system for squeeze casting process—soft computing-based approach, The International Journal of Advanced Manufacturing Technology, 2016, 86(1) 3051–3065, doi: 10.1007/s00170-016-8416-8.
[18] Patel M. G.C., Shettigar A.K., Parappagoudar M.B., A systematic approach to model and optimize wear behaviour of castings produced by squeeze casting process, Journal of Manufacturing Processes, 2018, 32, 199–212, doi: 10.1016/j.jmapro.2018.02.004.
[19] Senthil P., Amirthagadeswaran K.S., Optimization of squeeze casting parameters for non-symmetrical AC2A aluminium alloy castings through Taguchi method, Journal of Mechanical Science and Technology, 2012, 26(4) 1141–1147, doi: 10.1007/s12206-012-0215-z.
[20] Souissi N., Souissi S., Niniven C. L., Ben Amar M., Bradai C., Elhalouani F., Optimization of squeeze casting parameters for 2017 A wrought al alloy using Taguchi method, Metals, 2017, 3(4) 141–154, doi: 10.3390/met4020141.
[21] Hassasi S.A., Abbasi M., Hosseinipour S.J., Parametric investigation of squeeze casting process on the microstructure characteristics and mechanical properties of A390 aluminum alloy, International Journal of Metalcasting, 2020, 14, 69–83.
https://doi.org/10.1007/s40962-019-00325-0
[22] Heidari Ghaleh M., Hosseinipour S. J., Abbasi M., Solidification microstructure of ultra-thin cellular Al-11Si alloy produced by hybrid additive manufacturing and suction casting, International Journal of Metalcasting, 2025, 17 July accepted,
https://doi.org/10.1007/s40962-025-01684-7.
[23] Mao A., Zhang J., Yao S., et al., The diffusion behaviors at the Cu-Al solid-liquid interface: A molecular dynamics study, Results in Physics, 2020, 16, 102998, doi: 10.1016/j.rinp.2020.102998.
[24] Vijian P., Arunachalam V. P., Optimization of squeeze cast parameters of LM6 aluminium alloy for surface roughness using Taguchi method, Journal of Materials Processing Technology, 2006, 180, 1–3, 161–166, doi: 10.1016/j.jmatprotec.2006.05.016.
[25] Pelzer R., Woehlert S., Koerner H., Khatibi G., Walter J., Growth behavior and physical response of Al-Cu intermetallic compounds, 2014 IEEE 16th Electronics Packaging Technology Conference (EPTC), Singapore, 2014, 372–377, doi: 10.1109/EPTC.2014.7028259.
[26] Yougui L., Practical Electron Microscopy and Database, An Online Book, Second Edition, 2006,
https://www.globalsino.com/EM/page2000.html
[27] میرباقری س. م.ح.، امینی ا.، عبدی بجندی ا.، ریختهگری کامپوزیت پیشرفته پایه زاماک 5 با فاز فلزی تقویت کننده سه بعدی پیوسته مسی، پژوهشنامه ریختهگری، 1399، 4(3) 136-129.
[28] نوروزی ف.، حسینیپور س.ج.، عباسی م.، اثر متغیرهای ریختهگری کوبشی بر مشخصههای ریزساختاری کامپوزیت زاماک5 تقویتشده با پیشماده آلومینایی، پژوهشنامه ریختهگری، 1401، 6(3) 203-212.
[29] حصاصی س.ع.، عباسی م.، حسینیپور س.ج.، بررسی ریزساختار انجمادی آلیاژ آلومینیم A390 تولید شده به روش ریختهگری کوبشی، پژوهشنامه ریختهگری، 1397، 2(1) 1-10.
[30] حصاصی س.ع.، عباسی م.، حسینیپور س.ج.، بررسی اثر متغیرهای ریختهگری کوبشی بر خواص مکانیکی و رفتار سایشی آلیاژ آلومینیم A356، پژوهشنامه ریختهگری، 1397، 2(4) 263-273.
[31] Hassasi S.A., Abbasi M., Hosseinipour S.J., Effect of squeeze casting parameters on the wear properties of A390 aluminum alloy, International Journal of Metalcasting , 2021, 15, 852–863,
doi.: 10.1007/s40962-020-00507-1
[32] حجازی ج.، انجماد و اصول متالورژیکی ریختهگری، چاپ سوم، دانشگاه علم و صنعت ایران، 1373.
