[1] Jiang J. Shi J., Yao Y., Ma A., Song D., Yang D., Chen J., Lu F., Dynamic compression properties of an ultrafine-grained Al-26 wt.% Si alloy fabricated by equal-channel angular pressing, Journal of Materials Engineering and Performance, 2015, 24, 2016-2024.
[2] Wu S. S., Zhong G., AN P., Wan L., Nakae H., Microstructural characteristics of Al−20Si−2Cu−0.4Mg−1Ni alloy formed by rheo-squeeze casting after ultrasonic vibration treatment, Transactions of Nonferrous Metals Society of China, 2012, 22, 2863-2870.
[3] Fathy N., Microstructural evolution of hyper-eutectic Al-18% Si alloy during semi-solid isothermal heat treatment, Journal of Research in Chemical, Metallurgical and Civil, 2014, 1, 1442-1450.
[4] Ma A., Suzuki K., Saito N., Nishida Y., Takagi M., Shigematsu I., Iwata H., Impact toughness of an ingot hypereutectic Al–23mass% Si alloy improved by rotary-die equal-channel angular pressing, Materials Science and Engineering: A, 2005, 399, 181-189.
[5] Hekmat-Ardakan A., Ajersch F., Effect of isothermal ageing on the semi-solid microstructure of rheoprocessed and partially remelted of A390 alloy with 10% Mg addition, Materials Characterization, 2010, 61, 778–785.
[6] Ramadan M., Fathy N., Solidification microstructure of rheocast hyper‐eutectic Al–18Si alloy, Journal of Metallurgical Engineering, 2013, 2 (4) 149-154.
[7] Al-Helal K., Stone I.C., Fan Z., Simultaneous primary Si refinement and eutectic modification in hypereutectic Al–Si alloys, Trans Indian Inst. Met., 2012, 65(6) 663–667.
[8] Zhong G., Wu S., Jiang H., An P., Effects of ultrasonic vibra-tion on the iron-containing intermetallic compounds of high silicon aluminum alloy with 2% Fe, Journal of Alloys and Compounds, 2010, 492, 482–487.
[9] Piątkowski J., Gajdzik B., Matuła T., Crystallization and structure of cast A390 alloy with melt overheating temperature, Metalurgija, 2012, 51, 321-324.
[10] Omura N., Murakami Y., Li M., Tamura T., Miwa K., Furukawa H., Harada M., Yokoi M., Effects of mechanical vibration on macrostructure and mechanical properties of AC4C aluminum alloy castings, Materials Transactions, 2009, 50(11) 2578-2583.
[11] Jiang J., Atkinson H. Wang V., Microstructure and mechanical properties of 7005 aluminum alloy components formed by thixoforming, Journal of Materials Science and Technology, 2017, 33(4) 1-19.
[12] Khosravi H., Eslami-Farsani R., Askari-Paykani M., Modeling and optimization of cooling slope process parameters for semi-solid casting of A356 Al alloy, Transactions of Nonferrous Metals Society of China, 2014, 24, 961−968.
[13] Nourouzi S., Damavandi E., Rabiee S.M., Microstructural and mechanical properties of Al–Al2O3 composites focus on experimental Techniques, International Journal of Microstructure and Materials Properties, 2016, 11(5) 383-398.
[14] Cui C., Schul, A., Schimanski K., Zoch H. W., Spray Forming of Hypereutectic Al–Si Alloys, Journal of Materials Processing Technology, 2009, 209 5220–5228.
[15] Xu C.L., Jiang Q.C., Morphologies of primary silicon in hyper-eutectic Al–Si Alloys with melt overheating temperature and cooling rate, Materials Science and Engineering A, 2006, 437, 451–455.
[16] Kang S. B., Zhang J., Wang S., Cho J., Stetsenko V. U., Effect of cooling rate on microstructure and mechanical properties in Al-Si alloys, Proceedings of the 12th International Conference on Aluminum Alloys,2010, 675-680.
[17] Birol Y., Cooling slope casting and thixoforming of hypereutectic A390 alloy, Journal of Material Processing Technology, 2008, 207 200–203.
[18] Zhao Z., Chen Q., Wang Y., Shu D., Microstructural evolution of an ECAE-formed ZK60-RE magnesium alloy in the semi-solid state, Materials Science and Engineering A, 2009, 506, 8–15.
[19] Damavandi E., Nourouzi S., Rabiee S. M., Effect of porosity on microstructure and mechanical properties of Al2O3(p)/Al-A356 MMC, Modares Mechanical Engineering, 2015, 15(3) 243-250 (in Persian).
[20] Yanbo Z., Xiuteng M., Zhen M., Centrifugal forming mechanism of al gradient composites reinforced with complementary primary Si and Mg2Si particles, Rare Metal Materials and Engineering, 2014, 43(4) 0769-0774.