@article { author = {daneshmand, hamid and Araghchi, Masoud and soleimany, mohammad}, title = {Simulation of Direct Chill Casting in the Presence of Low Frequency Magnetic ‎Field to Produce 7075 Aluminum Alloy Billets}, journal = {Founding Research Journal}, volume = {5}, number = {3}, pages = {193-204}, year = {2021}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2022.333929.1154}, abstract = {  Direct Chill casting is a suitable method for the production of high diameter aluminum sheets. In this method, molten aluminum is poured into a mold and the mold is cooled by hydrogen. Despite the improvements made in the casting process, unwanted defects still appear during the production of the product. To deal with these problems, improved methods of direct refrigeration (DC) process are used, including direct refrigeration casting using hot top and casting in the presence of low frequency magnetic field (LFEC). Due to the advantages of direct refrigeration casting in the presence of a magnetic field, simulation of this process is important in order to better investigate the effect of the magnetic field on the molten pool, so that before any experimental work a numerical approximation of the magnetic field effect is obtained. Be. In this report, the direct refrigeration casting process is simulated in the presence of a magnetic field using ANSYS Fluent 19.2 software. The simulation output includes temperature distribution profiles, liquid volume fraction, velocity and steady-state flow lines for DC and LFEC casting for 70- and 14-inch diameter aluminum alloy billets and associated molds.}, keywords = {Direct Chill (DC) casting,billet,7075 aluminum alloy,Simulation,magnetic field strength}, title_fa = {شبیه سازی ریخته‌گری تبرید مستقیم در حضور میدان مغناطیسی با فرکانس پایین به منظور تولید بیلت‌های آلیاژ آلومینیوم 7075}, abstract_fa = {ریخته‌گری تبرید مستقیم یک روش مناسب برای تولید بیلت‌های آلومینیومی با قطر بالا است. در این روش آلومینیوم مذاب در یک قالب ریخته می‌شود و قالب به‌صورت آبگرد خنک می‌شود. باوجود بهبودهای حاصل‌شده در فرایند ریخته‌گری، همچنان عیوب ناخواسته‌ای در حین تولید محصول پدیدار می‌شود. برای مقابله با این مشکلات، از روش‌های بهبودیافته فرایند تبرید مستقیم (DC) ازجمله ریخته‌گری تبرید مستقیم با استفاده از بالاپوش (Hot top) و ریخته‌گری در حضور میدان مغناطیسی با فرکانس پایین (LFEC) استفاده می‌شود. با توجه به مزایای ریخته‌گری تبرید مستقیم در حضور میدان مغناطیسی، شبیه‌سازی این فرایند به‌منظور بررسی هرچه بهتر تأثیر میدان مغناطیسی بر حوضچه مذاب اهمیت پیدا می‌کند، به‌نحوی‌که قبل از هرگونه کار تجربی یک تقریب عددی از میزان تأثیرگذاری میدان مغناطیسی حاصل می‌شود. در این گزارش، شبیه‌سازی فرایند ریخته‌گری تبرید مستقیم در حضور میدان مغناطیسی با استفاده از نرم‌افزار ANSYS Fluent 19.2 صورت گرفته است. خروجی شبیه‌سازی شامل پروفیل‌های توزیع دما، کسر حجمی مایع، سرعت و خطوط جریان در حالت پایدار برای ریخته‌گری DC و LFEC برای بیلت آلیاژ آلومینیوم 7075 با قطر 18 و14 اینچ و قالب‌های مربوطه است.}, keywords_fa = {ریخته گری تبرید مستقیم,بیلت,آلیاژ آلومینیوم 7075,شبیه سازی,شدت میدان مغناطیسی}, url = {https://www.foundingjournal.ir/article_150068.html}, eprint = {https://www.foundingjournal.ir/article_150068_47c4c91d5b392aa87f292212d07ac03e.pdf} }