@article { author = {Seifollahi, Masumeh and Kouhi, Saeed and Abbasi, Seyed Mahdi and Ghazi mir Saeed, Seyed Mahdi}, title = {Effect of Crucible Type on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy}, journal = {Founding Research Journal}, volume = {6}, number = {1}, pages = {3-8}, year = {2022}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2022.342625.1156}, abstract = {Rene 80 is a cast alloy which widely used in turbine blade industry. The purpose of this investigation is to study the effect of crucible type (Zirconia and Alumina) in vacuum induction melting furnace (VIM) with alumina rucible on the amount of gases, γ' precipitates and stress rupture properties of Rene 80 superalloy. For this purpose, the amount of O, N gasses and chemical composition were analyzed. The microstructure was assessed by scanning electron microscopy (SEM) and stress rupture properties was performed at 980˚C. The results showed that Crucible type has no considerable effect on the γ' size and morphology but γ' volume fraction increased about 3% in the alloy melts in Zirconia crucible in comparison to Alumina one. The result of mechanical test showed that the stress-rupture life of sample melts in Alumina and Zirconia crucibles are 22.6 and 24.7 respectively because of reducing γ' volume fraction in the alloy melt in Alumina crucible.}, keywords = {Crucible Type,VIM furnaces,&gamma,',Precipitates,Stress Rupture properties,Rene 80 superalloy}, title_fa = {اثر نوع بوته در کوره VIM بر رسوبات 'γ و خواص تنش-گسیختگی سوپرآلیاژ پایه نیکل Rene 80}, abstract_fa = { سوپرآلیاژ پایه نیکل Rene80 یکی از پرکاربردترین آلیاژها در تولید پره‌ی توربین است که به دلیل حضور عناصر گسترده در ترکیب شیمیایی، به روش ریخته‌گری القایی تحت خلأ تولید می‌گردد. در این پژوهش تاثیر نوع بوته در آلیاژسازی سوپرآلیاژ پایه نیکل Rene‌80 مورد بررسی قرار گرفته‌است. آلیاژسازی و ذوب مجدد در بوته‌های آلومینایی و زیرکونیایی انجام شد. پس از ذوب، آنالیز ترکیب شیمیایی، آنالیز گاز اکسیژن و نیتروژن انجام و ریزساختار با میکروسکوپ الکترونی روبشی بررسی شد. عمر تنش-گسیختگی در دمای 980 درجه سانتی‌گراد و تنش 191 مگاپاسکال نیز اندازه‌گیری شد. نتایج نشان داد که نوع بوته بر اندازه‌ی رسوبات 'γ و مورفولوژی آن بی‌تأثیر است ولی کسر حجمی رسوبات 'γ پس از پیرسازی نهایی در شمش تولید شده در بوته زیرکونیایی نسبت به بوته آلومینایی به میزان 3 درصد افزایش داشته‌است که نشان‌دهنده‌ی پایداری بیشتر بوته‌ی آلومینیایی است. عمر گسیختگی آلیاژ ذوب شده در بوته‌ی زیرکونیایی نسبت به بوته‌ی آلومینایی بالاتر است که به مقدار زیادی ناشی از افزایش کسر حجمی رسوبات ‌'γ در ریزساختار آلیاژ است.‏}, keywords_fa = {سوپرآلیاژ Rene 80,کوره VIM,بوته,رسوبات ',&gamma,تنش-گسیختگی}, url = {https://www.foundingjournal.ir/article_153918.html}, eprint = {https://www.foundingjournal.ir/article_153918_dfa6be8ebc9ec5f85e178899b252e480.pdf} }