@article { author = {Farahany, Saeed}, title = {Using Thermal Analysis and Interrupted Quenching Technique to Examine ‎Interactive Effect of Bi-Sr on Porosity Formation Characteristics in Al-7Si-0.4Mg Alloy}, journal = {Founding Research Journal}, volume = {1}, number = {3}, pages = {181-191}, year = {2018}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2018.119943.1028}, abstract = {In this research, cooling curve thermal analysis and interrupted quenching technique were employed to examine interactive effect of Sr-Bi on porosity characteristics of the Al-7Si-0.4Mg alloy commonly used in industry. Based on obtained cooling curve profile and plotting the first and second derivative curves, solidification process of the alloy was studied. Solid fraction curves were calculated and corresponding exact temperatures for precipitation of 20, 45 and 80% solid for alloys with different Sr/Bi ratios, namely 0.1, 0.34 and 0.46 were determined. Subsequently, alloys were quenched rapidly at determined temperatures in the same solid fraction. Porosity characteristics consist of size, area and density were measured using an optical microscope equipped with image analyzer software. Results show that the size, area and density of porosity were affected by Sr/Bi ratio and solid fraction percentage. Area percentage and size of porosity increased by 75% and 141% respectively with increase of Sr/Bi ratio from 0.1 to 0.46. Critical solid fraction for the nucleation and growth of porosity in the alloys were determined at 70% and 80%respectively while Sr and Bi co-existed.}, keywords = {Aluminium,Thermal analysis,porosity,Bismuth,Strontium}, title_fa = {استفاده از آنالیز حرارتی و کوئنچ منقطع به منظور بررسی اثر متقابل بیسموت و استرنسیم بر ‏مشخصه‌های تخلخل}, abstract_fa = { در این تحقیق با استفاده از آنالیز‌حرارتی منحنیِ سرد‌شدن و نیز کوئنچ منقطع، تاثیر متقابل بیسموت و استرنسیم بر روی مشخصه‌های تخلخل در آلیاژ مرسوم مورد استفاده در صنعت (Al-7Si-0.4Mg) مورد بررسی قرار گرفت. بر اساس منحنی‌ سرد‌شدنِ بدست آمده و رسم منحنی‌های مشتق اول و مشتق دوم آن، فرآیند انجماد آلیاژ مورد بررسی قرار گرفت. با محاسبه منحنی کسر‌جامد، دماهایِ متناظر با تشکیل 20، 45 و 80 درصد کسر جامد برای آلیاژهای حاوی نسبت‌های مختلف Sr/Bi یعنی 1/0، 34/0 و 46/0 به طور دقیق تعیین شد. سپس آلیاژها در مقادیر یکسان کسرِجامد به سرعت در دماهای مشخص‌شده کوئنچ شدند. مشخصه‌های تخلخل شامل اندازه، مساحت و چگالی‌ با استفاده از میکروسکوپ نوری مجهز به نرم‌افزار آنالیزگر تصویر مورد اندازه‌گیری قرار گرفتند. نتایج نشان‌داد که اندازه، مساحت و چگالی تخلخل‌ها متاثر از نسبت Sr/Bi و درصد کسرِ جامد است. با افزایش نسبت Sr/Bi از 1/0 به 46/0، مساحت و اندازه تخلخل‌ها به ترتیب به میزان 75  و 141 درصد افزایش ‌یافت. کسرِ ‌جامدِ بحرانی جوانه‌زنی تخلخل‌ها و کسرِ‌جامدِ بحرانی رشد تخلخل‌ها در حضور هم‌زمان بیسموت و استرنسیم در آلیاژهای فوق به ترتیب 70 و 80 درصد تعیین شد.}, keywords_fa = {آلومینیم,آنالیز‌ حرارتی,تخلخل,بیسموت,استرنسیم}, url = {https://www.foundingjournal.ir/article_61416.html}, eprint = {https://www.foundingjournal.ir/article_61416_b47b016689fc03f9bf8366c1ed6adace.pdf} }