@article { author = {Khalvan, Mohammad Mehdi and Divandari, Mehdi}, title = {Effects of Aluminum Content on Microstructure and Matrix Hardness of ‎Spherical Graphite Cast Irons Produced by in-Mold ‎Process}, journal = {Founding Research Journal}, volume = {2}, number = {4}, pages = {251-261}, year = {2019}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2018.133149.1041}, abstract = {In this research, the effect of various amounts of aluminum on microstructure and ‎matrix hardness of ductile cast irons produced by in-mold casting process is investigated. ‎For this purpose, spherical graphite cast iron containing 3‎‏.‏‎7, 6‎‏.‏‎4 and 7‎‏.‏‎5 wt. % aluminum, ‎respectively, were prepared in Y-block form via in-mold process. After casting, samples ‎were prepared for microstructural studies, using conventional methods, and then were ‎examined by optical and scanning electron microscopy. Chemical composition of samples ‎was determined using optical emission spectrometry (OES), X-ray fluorescence (XRF), and ‎carbon-sulfur analyzer (LECO) method. X-ray diffraction test (XRD) was used for phase ‎identification. The results indicate changing of the precipitated pearlite morphology as the ‎aluminum content increases. Also pearlite and ferrite hardness increases, 178 and 164 ‎Vickers, respectively, as a result of increasing aluminum content from 3.7 to 7.5 wt. %. ‎Increasing the number of nodular graphites from 422 to 668 per square millimeter, reducing the graphite diameter from 13.1 to 8.8 micrometers, and changing the percentage of spherical graphite from ‎‎60 to 48 percent, with increasing aluminum content, are other noteworthy results.‎}, keywords = {Al-alloyed Cast Iron,In-mold process,Microstructure,Micro-hardness,Nodular Graphite}, title_fa = {تاثیر مقدار آلومینیم بر ریزساختار و سختی زمینه چدن‌های با گرافیت کروی تولیدشده به روش منیزیم در راهگاه}, abstract_fa = {این پژوهش به تاثیر مقادیر مختلف آلومینیم بر ریزساختار و خواص چدن‌های با گرافیت کروی تولیدشده به ‏روش منیزیم در راهگاه اختصاص دارد. به این منظور چدن با گرافیت کروی به ترتیب حاوی 7/3، 4/6 و 5/7 ‏درصد وزنی آلومینیم به‌صورت ‏Y‏ بلوک در ماسه معمولی و به روش منیزیم در راهگاه تهیه شد. پس از ‏آماده‌سازی نمونه‌ها بر اساس روش‌های متداول، ریزساختار چدن‌های تولیدشده با استفاده از میکروسکوپ‌های ‏نوری و الکترونی روبشی مورد بررسی قرار گرفت. تعیین ترکیب شیمیایی نمونه‌ها به‌وسیله آنالیز عنصری ‏کوانتومتری، طیف‌سنجی فلورسانس اشعه ایکس و آنالیز ‏LECO‏ و شناسایی فازهای رسوب کرده توسط ‏آزمون تفرق اشعه ایکس انجام شد. نتایج بررسی‌ها، بیانگرتغییر مورفولوژی و افزایش میزان پرلیت رسوب‌کرده ‏براثر افزایش مقدار آلومینیم. همچنین فاز پرلیت و فریت به ترتیب افزایش سختی به میزان 178 و 164 ‏ویکرز را با افزایش آلومینیم از 7/3 به 5/7 درصد وزنی نشان می‌دهد. افزایش تعداد کره‌ها از 422 به 668 در ‏واحد سطح، کاهش اندازه دانه و کرویت گرافیت‌ها به ترتیب از 1/13 به 8/8 میکرومتر و از 60 به 48 درصد، ‏از دیگر نتایج است. شرایط بروز هرکدام از فازهای فوق مورد بحث قرارگرفته است.‏}, keywords_fa = {چدن آلومینیم دار,روش منیزیم در راهگاه,ریزساختار,ریزسختی,گرافیت کروی}, url = {https://www.foundingjournal.ir/article_77029.html}, eprint = {https://www.foundingjournal.ir/article_77029_621388fffba647ae7b62c1d641c5d415.pdf} }