@article { author = {Sadeghi Mohammadi, Mohsen and Hadi, Morteza and Karimi, Hadi and Bayat, Omid}, title = {Determination of Critical Pressure and Impeding ‎Pressure for Manganese ‎Evaporation During ‎the ‎Induction Melting Process of Manganese-Nickel Alloys}, journal = {Founding Research Journal}, volume = {3}, number = {2}, pages = {67-74}, year = {2019}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2019.188516.1087}, abstract = {In recent years, manganese-nickel alloys have been studied by many researchers due to their unique magnetic properties. The purpose of this study was to investigate the effect of pressure of the compartment on the manganese evaporation process and to determine critical and inhibit evaporation pressures and temperature for this element in manganese-nickel alloys (70Mn-25Ni-5Cr and 40Mn-55Ni-5Cr). In this regard, manganese-nickel alloys in a vacuum induced melting furnace, under the atmosphere of argon by positive pressure (0.4, 0.6, 0.8, 1, 2, 2.5, 3, 4, and 4.5) bar melted at temperatures of 1450, 1550 and 1650°C. For the above conditions, the rate of evaporation was calculated and illustrated by plotting evaporation rate graphs with pressure, the critical pressure and impeding pressure for manganese evaporation determined. The results showed that pressures of 1 bar and 3 bar were sequencly critical pressure and impeding pressure for manganese evaporation in manganese-nickel alloys. It was also found that the increase in melting temperature caused an increase in the evaporation rate, but the critical pressure and inhibit pressure remained unchanged for manganese evaporation in the alloys.}, keywords = {manganese-nickel alloys,evaporation,critical pressures,Impeding pressures}, title_fa = {تعیین فشار بحرانی و فشار ممانعت کننده برای تبخیر منگنز در حین فرایند ذوب القایی آلیاژهای منگنز- نیکل}, abstract_fa = {در سال‌های اخیر، آلیاژهای منگنز-نیکل با توجه به خواص مغناطیسی منحصر به ‌فرد مورد مطالعه محققین بسیاری قرار گرفته‌اند. هدف از ‏این پژوهش، بررسی اثر فشار محفظه بر فرایند تبخیر منگنز و تعیین فشارهای بحرانی و ممانعت کننده‌ی تبخیر و دما برای این عنصر در ‏آلیاژهای منگنز- نیکل (‏‎70Mn-25Ni-5Cr‎‏ و ‏‎40Mn-55Ni-5Cr‎‏) است. در این زمینه، آلیاژهای منگنز- نیکل در کوره‌ی ذوب ‏القایی تحت خلأ، تحت اتمسفر آرگون با فشار مثبت  4/0، 6/0، 8/0، 1، 2، 5/2، 3، 4 و 5/4 بار در دماهای1450،1550و 1650 ‏درجه سانتی‌گراد ذوب شدند. برای شرایط فوق، نرخ تبخیر محاسبه شد و با ترسیم نمودارهای نرخ تبخیر با فشار، میزان فشار بحرانی و ‏فشار ممانعت کننده برای تبخیر منگنز مشخص شد. نتایج به دست آمده از این تحقیق نشان داد است که برای تبخیر منگنز در آلیاژهای منگنز- ‏نیکل، فشار 1 بار، فشار بحرانی و فشار 3 بار، فشار ممانعت کننده است. همچنین مشخص شد که افزایش دمای ذوب، باعث افزایش نرخ ‏تبخیر‎ ‎می‌شود اما میزان فشار بحرانی و فشار ممانعت کننده برای تبخیر منگنز در آلیاژها بدون تغییر باقی می‌مانند.‏}, keywords_fa = {آلیاژهای منگنز- نیکل,تبخیر,فشار بحرانی,فشار ممانعت کننده}, url = {https://www.foundingjournal.ir/article_91010.html}, eprint = {https://www.foundingjournal.ir/article_91010_c62796f9803d3ff7cd35e8d472641161.pdf} }