@article { author = {Ashkevary, Sahar and Shabestari, Saeed}, title = {Investigation on Effects of Melt Temperature on Solidification Behavior of ‎ in-situ Al-Mg2Si Composite using Cooling Curve Thermal Analysis‎}, journal = {Founding Research Journal}, volume = {4}, number = {1}, pages = {1-9}, year = {2020}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2019.208458.1107}, abstract = {The in-situ Al-Mg2Si composites have attracted much attention in many important industries such as automotive and aerospace due to their low density, high specific strength, good wear resistance and thermal stability. In this research, solidification characteristics of in-situ Al-20%Mg2Si composites has been investigated using cooling curve thermal analysis technique. For this purpose, the thermal analysis curves of this composite have been plotted at three different temperatures of 750, 800, 850℃ and the effect of superheat on the solidification parameters has been investigated. The results demonstrated that the superheat temperature affect the nucleation and growth of primary Mg2Si phase and the eutectic reaction. Increasing the heat temperature from 750 to 850℃, increases the nucleation temperature of primary Mg2Si, solidification range and decreases the growth temperature of the binary eutectic reactions. The size and aspect ratio of Mg2Si reinforcement phase decreases by increasing the superheat. Therefore, the distribution of these phases will be improved and it will promote better mechanical properties in the composite.}, keywords = {Thermal analysis,In-situ Al-Mg2Si composite,superheating,solidification parameters}, title_fa = {بررسی اثرات دمای ذوب بر رفتار انجمادی کامپوزیت درجا ‏Al-Mg2Si‏ به روش آنالیز حرارتی}, abstract_fa = {امروزه کامپوزیت‌های درجا Al-Mg2Si به دلیل چگالی کم، استحکام ویژه زیاد، مقاومت به سایش و پایداری حرارتی خوب، مورد توجه صنایعی ازجمله خودروسازی و هوافضا قرارگرفته‌اند. در این تحقیق، به بررسی اثرات مقدار دمای ذوب بر مشخصه‌های انجمادی کامپوزیت درجا Al-20%Mg2Si، از طریق آنالیز حرارتی منحنی‌های سرد شدن پرداخته شده است. به این منظور، منحنی‌های آنالیز حرارتی این کامپوزیت در سه دمای ذوب 750، 800 و 850 درجه سانتی‌گراد رسم شده و تأثیر دمای ذوب بر مشخصه‌های انجمادی این کامپوزیت بررسی شده است. نتایج نشان می‌دهد که تغییرات دمای ذوب بر مشخصه­های جوانه‌زنی و رشد فاز مقاوم‌ساز Mg2Si و مشخصه‌های واکنش یوتکتیک تأثیرگذار است. به‌گونه‌ای که افزایش دمای ذوب از °C750 به °C850، موجب افزایش دمای جوانه­زنی فاز مقاوم‌ساز Mg2Si، از °C 6/687 به °C 2/690، افزایش دامنه انجماد به میزان °C 4/22 و کاهش دمای رشد واکنش یوتکتیک دوتایی به میزان °C 7/3 می‌شود. با افزایش دمای ذوب، اندازه فاز مقاوم‌ساز Mg2Si، 16درصد کاهش یافته و توزیع آن‌ها در ساختار کامپوزیت یکنواخت‌تر می‌شود که این امر می‌تواند منجر به بهبود خواص مکانیکی شود.}, keywords_fa = {آنالیز حرارتی,کامپوزیت در جا Al-Mg2Si,فوق ذوب,مشخصه های انجمادی}, url = {https://www.foundingjournal.ir/article_99710.html}, eprint = {https://www.foundingjournal.ir/article_99710_5425c21598ba39bab55334b3bdf44d4b.pdf} }