@article { author = {Rahimi, Abolfazl}, title = {Developing Ag-9Pd (Silvadium) Casting Alloys with High-Luminosity Lifespan ‎for Traditional Jewelry‎}, journal = {Founding Research Journal}, volume = {4}, number = {2}, pages = {111-118}, year = {2020}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2020.237749.1121}, abstract = {In this study, Ag-9Pd alloy is introduced as a suitable alloy with a high luminosity for the ring production process. Initially, due to the high price of it, the amount of palladium required to achieve 100 grams of Ag-9Pd (Silvadium) alloy was calculated by the HSC Chemistry 5 software. In order to verify the calculations results, the alloy developed by coagulation casting and rapid solidification was assessed by ICP. As a result, the evaluation indicated great calculations precision. Also, the microstructure, hardness, and luminosity of the produced alloy were compared with both pure silver and Ag-4Pd alloy. The results of microscopic images depicted that Ag-9Pd alloy had smaller dendritic spaces, more homogeneous structures, as well as no defects. Raising the volume fraction of zinc-enriched PdCu and nickel-based precipitates increased the hardness based on the Orvan mechanism. Therefore, as the amount of Pd rises, the luminosity and luminosity life span of the alloy increased due to the improvement in oxidation resistance.}, keywords = {Ag-Pd,Mass and Energy Balance Calculations,Precipitates,Shine}, title_fa = {توسعه آلیاژهای ریختگی Ag-9Pd (سیلوادیم) با عمر درخشش بالا برای ساخت زیورآلات سنتی}, abstract_fa = {در این تحقیق، آلیاژ Ag-9Pd به‌عنوان یک آلیاژ مناسب با میزان درخشندگی بالا برای ساخت انگشتری معرفی شده است. در ابتدا با توجه به قیمت بسیار بالای پالادیم، میزان پالادیم لازم برای داشتن صد گرم آلیاژ Ag-9Pd (سیلوادیم) به وسیله نرم‌افزار HSC Chemistry 5 محاسبه شد. آلیاژ تولید شده به وسیله کوره القائی و انجماد سریع تهیه شد. سپس برای صحت‌سنجی نتایج محاسبات بالانس جرمی، تحت آزمایش ICP قرار گرفت، که نتایج حاصله حاکی از دقت بالای محاسبات وزن و انرژی بود. ریزساختار، سختی و درخشندگی آلیاژ تولید شده با نقره خالص و آلیاژ مرسوم Ag-4Pd برای ساخت انگشتری مقایسه شد. نتایج تصاویر میکروسکوپی حاکی از آن بود که آلیاژ Ag-9Pd دارای ساختار دندریتی ظریف­تر، ساختاری همگن‌تر و عاری از عیب است. افزایش کسر حجمی رسوبات PdCu غنی‌شده با فلز روی و رسوبات مبتنی بر نیکل باعث افزایش سختی بر اساس مکانیزم اوروان شد. با افزایش میزان پالادیم در آلیاژ میزان درخشش و عمر درخشش آلیاژ به جهت افزایش مقاومت در برابر اکسیداسیون افزایش یافت.}, keywords_fa = {Ag-9Pd,محاسبات بالانس جرمی,رسوب,سختی,درخشش}, url = {https://www.foundingjournal.ir/article_112852.html}, eprint = {https://www.foundingjournal.ir/article_112852_dea83519fe1fe12373f1578169ab654a.pdf} }