@article { author = {Etminan, Mostafa and Morakabati, Maryam and Ghazi Mir Saeed, Seyed Mahdi}, title = {Effect of Aging on the High Temperature Mechanical Properties of a Novel Co-‎‎7Al-7W-4Ti-2Ta Superalloy}, journal = {Founding Research Journal}, volume = {4}, number = {4}, pages = {193-201}, year = {2021}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2020.245029.1125}, abstract = {The aim of this study was to evaluate the effect of aging on the stress rupture and hot pressure of novel cobalt base superalloy of Co-7Al-7W-4Ti-2Ta composition. After melting the superalloy by VIM method and remelting by VAR method, the ingot was homogenized at 1250 °C for 10 hours. Then, aging treatment was performed on homogenized samples at 800 °C for 8, 16 and 24 hours. After microstructural and phase analysis by SEM and X-ray diffraction pattern testing, the high temperature mechanical properties including hot pressure and stress rupture tests were performed. The results showed that the alloy in the cast condition contains ɣ, ɣ‘, a and β phases in which the ɣ‘, a and β phases are dissolved in ɣ phase by homogenization treatment. By aging of the studied alloy, ɣ‘ precipitates nucleate and grow, where in by increasing aging time the volume fraction and size of these precipitates increases. The results of pressure tests in the temperature range of 500 °C to 1000 °C showed that the strength of the alloy increased at a temperature of 700 °C, which indicates the occurrence of the stress anomaly phenomenon as a consequence of ɣ‘precipitation. Besides, the highest resistance to stress rupture at 770 °C under 300 MPa for 22 hours was achieved for the specimen aged at 800 °C for 16 hours.}, keywords = {Novel Co-base superalloy,aging,Hot compression,stress rupture}, title_fa = {تاثیر عملیات پیرسازی بر خواص مکانیکی دما بالای سوپرآلیاژ نسل جدید Co-7Al-7W-4Ti-2Ta}, abstract_fa = {هدف از انجام این پژوهش، ارزیابی تاثیر عملیات پیرسازی بر خواص گسیختگی تنشی و فشار گرم سوپرآلیاژ پایه کبالت نسل جدید ‏با ترکیب ‏Co-7Al-7W-4Ti-2Ta‎‏ است. پس از ذوب سوپرآلیاژ نامبرده به روش ‏VIM‏ و ذوب مجدد به روش ‏VAR، شمش به دست ‏آمده تحت همگن‌سازی در دمای 1250 درجه سانتیگراد و به مدت 10 ساعت قرار گرفت. سپس عملیات پیر‌سازی روی نمونه‌های همگن‌سازی ‏شده در دمای ‎‏ 800 درجه سانتیگراد طی زمان‌های 8، 16 و 24 ساعت انجام شد. پس از بررسی‌های ریزساختاری و آنالیز فازی بوسیله ‏میکروسکوپ الکترونی و آزمایش الگوی تفرق اشعه ‏ایکس، خواص مکانیکی دما بالا شامل آزمایش‌های فشار گرم و گسیختگی تنشی ‏انجام یافت. نتایج نشان داد که آلیاژ مذکور در حالت ریختگی حاوی فازهای گاما، گاماپرایم، بتا و آلفا‏ است که با انجام عملیات همگن‌سازی ‏فازهای گاماپرایم، بتا و آلفا‏ در داخل فاز گاما انحلال می‌یابند. با پیرسازی آلیاژ مورد مطالعه رسوب‌های گاماپرایم جوانه‌زنی و رشد می‌کنند که با ‏افزایش زمان پیرسازی کسر حجمی و اندازه این رسوب‌ها نیز افزایش می‌یابد. نتایج آزمایش فشار روی نمونه پیرسازی شده به مدت ‏‏16 ساعت در محدوده دمایی ‏‎500 تا 1000 درجه سانتیگراد نشان داد که استحکام آلیاژ در دمای 700 درجه سانتیگراد افزایش یافت که نشان دهنده بروز پدیده ‏تسلیم نامتعارف به واسطه رسوب‌دهی فاز گاماپرایم است. همچنین حداکثر مقاومت در برابر گسیختگی تنشی در دمای ‏‎770 درجه سانتیگراد تحت تنش ‏‏300 مگاپاسکال و به مدت 22 ساعت مربوط به نمونه‌ای بود که در دمای 800 درجه سانتیگراد به مدت 16 ساعت پیرسازی شده بود.‏}, keywords_fa = {سوپرآلیاژ پایه کبالت نسل جدید,پیرسازی,فشار گرم,گسیختگی تنشی}, url = {https://www.foundingjournal.ir/article_119864.html}, eprint = {https://www.foundingjournal.ir/article_119864_baf392c22eaf77b35bb156efb605ff6e.pdf} }