@article { author = {Mohammadi, Morteza and Taghiabadi, Reza and Nazari, Maryam}, title = {Effect of Modifier Elements on Quality Index Improvement of A356 ‎Aluminum ‎Alloy ‎Before and After T6 Heat Treatment}, journal = {Founding Research Journal}, volume = {2}, number = {1}, pages = {11-25}, year = {2018}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2018.118501.1024}, abstract = {In this study, the effect of Ca, Sr, Mn, and Be on modification and quality index ‎improvement of A356 aluminum alloy containing 1.2 wt% Fe impurity was studied in as-‎cast and heat treated conditions. According to the results, Sr and Ca modified the eutectic Si ‎particles and decreased the size of detrimental β-Al5FeSi compounds so that their average ‎size reduced by 23 and 18%, respectively. The addition of Be and Mn did not affect the ‎eutectic Si, but converted the brittle b-platelets to the α-Fe Chinese-scripts. Due to this ‎microstructural variation, the quality index of the alloys modified by Ca, Sr, Be, and Mn has ‎increased by 58, 32, 31, and 17%, respectively. T6 heat treatment led to the precipitation ‎hardening of the alloy, thermally modified the eutectic Si particles, and fractured the b-‎particles. Although, it did not exert significant effect on the size and volume fraction of α-‎compounds. The maximum improvement of quality index in heat-treated samples (36 %) ‎was observed in non-modified base alloy whilst the amplitudes of the quality index ‎improvement in the Ca, Sr, Be and Mn modified samples were 6, 13, 21, and 19 ‎respectively. Increasing of porosity content and the remaining of rather large α-compounds ‎were found to be the most important factors responsible for the relative reduction of the ‎quality index in modified and heat treated samples.‎}, keywords = {A356,Modification,intermetallic,Modifier elements,Quality index}, title_fa = {تاثیر عناصر بهسازدر بهبود اندیس کیفیت ‏آلیاژ آلومینیم 356‏A‏‎ ‎قبل و بعد از عملیات حرارتی 6‏T}, abstract_fa = {در این تحقیق تاثیر کلسیم، استرانسیم، منگنز و برلیم در بهسازی و بهبود اندیس کیفیت آلیاژ 356‏A‏ آلومینیم حاوی 2/1 ‏درصد وزنی ناخالصی آهن، قبل و بعد از عملیات حرارتی، بررسی شده است. بر اساس نتایج حاصل شده، استرانسیم و کلسیم موجب ‏بهسازی ذرات سیلیسیم یوتکتیک و کاهش ابعاد ترکیبات مخرب ‏β-Al5FeSi‏ می‌شوند به‌گونه‌ای که اندازه متوسط این فازها به ‏ترتیب 23 و 18 درصد کاهش می‌یابد. افزودن برلیم و منگنز تاثیری بر فاز سیلیسیم یوتکتیک ندارد اما موجب جایگزینی ‏صفحات ترد و شکننده بتا توسط ذرات آلفا (‏α-Fe‏) با مورفولوژی حروف چینی می‌شود. در اثر این تغییرات ریزساختاری، اندیس ‏کیفیت آلیاژهای بهسازی شده توسط کلسیم، استرانسیم، برلیم و منگنز به ترتیب 58، 32، 31 و 17 درصد افزایش می‌یابد. ‏انجام عملیات حرارتی 6‏T‏ ضمن استحکام‌دهی رسوبی آلیاژ، موجب بهسازی حرارتی سیلیسیم یوتکتیک و خردایش صفحات ‏بتا می‌شود اما تاثیر آن در کاهش ابعاد و کسر حجمی ترکیبات آلفا کمتر است. بیشترین میزان بهبود اندیس کیفیت در نمونه بهسازی نشده با عملیات حرارتی به میزان 36 درصد است. در حالی‌‌که این میزان در نمونه‌های ‏بهسازی شده توسط کلسیم، استرانسیم، برلیم و منگنز به ترتیب 6، 13، 21 و 19 درصد است. افزایش میزان تخلخل و ‏حضور ترکیبات نسبتا درشت آلفا در ریزساختار از جمله مهمترین عوامل موثر در کاهش نسبی اندیس کیفیت نمونه‌های بهسازی ‏شده پس از عملیات حرارتی به شمار می‌آیند.‏}, keywords_fa = {356A,بهسازی,ترکیب بین فلزی,عناصر بهساز,اندیس کیفیت}, url = {https://www.foundingjournal.ir/article_61083.html}, eprint = {https://www.foundingjournal.ir/article_61083_97e296837231178e2626b9c6f7e9545f.pdf} }