@article { author = {Damavandi, Esmaeil and Nourouzi, Salman and Rabiee, Sayed Mahmood}, title = {The Effect of Pouring Temperature, Mechanical Vibration and Partial ‎Remelting on Microstructure and Mechanical Properties of Al-A390 Alloy}, journal = {Founding Research Journal}, volume = {2}, number = {1}, pages = {39-53}, year = {2018}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2018.101720.1002}, abstract = {  In the current research, the effect pouring temperature, mechanical vibration of mold, mold temperature and partial remelting on microstructure and mechanical properties of hypereutectic Al-Si alloy was investigated. For designing of experiment, Taguchi method is used. Signal to noise ratio and analysis of variance were used for finding optimized parameters and contribution percent of parameters on amount of output character. After finding the optimized parameters for producing primary billet, partial remelting process is carried out in three temperatures of 540, 555 and 565°C and five holding times of 5, 30, 60, 90 and 120 min. Scanning electron microscope and optical microscope have been used to evaluate the microstructure. The average particle diameter, distribution factor and sphericity of primary Si and Eutectic Si were analyzed by image analysis software. Result of analysis showed that sample with pouring temperature of 750°C, mold temperature of 350°C and frequency of vibration of 60Hz, had maximum hardness and tensile strength. On the other hand, the result of microstructure showed partial remelting process led to increase the sphericity and decrease of average particle diameter of Eutectic Si, but no slight effect on the size of primary Si.}, keywords = {Taguchi method,Partial remelting,hypereutectic Al-A390,Microstructure,Mechanical properties}, title_fa = {اثر دمای بارریزی، ارتعاش مکانیکی و گرمایش مجدد بر ریزساختار و خواص مکانیکی‏ آلیاژ ریختگی ‏Al-A390‎‏ ‏}, abstract_fa = {در پژوهش حاضر اثر دمای بارریزی، ارتعاش مکانیکی قالب، دمای قالب و گرمایش مجدد بر ریزساختار و خواص مکانیکی آلیاژ هایپریوتکتیک آلومینیم-سیلیسیم مورد بررسی قرار گرفت. برای طراحی آزمایش از روش تاگوچی استفاده شد. از نسبت سیگنال به نویز و آنالیز واریانس برای تعیین مقادیر مطلوب هر متغیر و همچنین درصد مشارکت متغیرها در مقدار متغیر خروجی (پاسخ) استفاده شد. اثر گرمایش مجدد نمونه‌ها در سه دمای 540، 555 و °C 565 و پنج زمان نگهداری 5، 30، 60، 90 و  120 دقیقه در شرایط مطلوب مورد بررسی قرار گرفت. برای بررسی ریزساختار از میکروسکوپ الکترونی روبشی و میکروسکوپ نوری مجهز به سیستم آنالیز تصاویر استفاده شد. قطر متوسط، شاخص توزیع و میزان کرویت ذرات سیلیسیم اولیه و سیلیسیم یوتکتیک محاسبه شد. دو آزمون سختی‌سنجی برینل و کشش به منظور ارزیابی خواص مکانیکی استفاده شد. نتایج آنالیز نشان داد که شمش ریخته‌گری شده در دمای بارریزی °C750 درجه سانتی‌گراد، دمای قالب °C350 و فرکانس ارتعاش قالب Hz60 از بالاترین مقدار سختی و استحکام کششی برخوردار است. از سوی دیگر، نتایج ریزساختاری نشان داد که فرآیند گرمایش مجدد، موجب افزایش کرویت و کاهش اندازه سیلیسیم یوتکتیک شد، اما تاثیر قابل توجهی بر اندازه سیلیسیم اولیه نداشت. }, keywords_fa = {روش تاگوچی,گرمایش مجدد,آلیاژ هایپریوتکتیک Al-A390,ریزساختار,خواص مکانیکی}, url = {https://www.foundingjournal.ir/article_61684.html}, eprint = {https://www.foundingjournal.ir/article_61684_9226c140733891ec567c17199866de7a.pdf} }