@article { author = {Abbasian, Abbas and Davodi, Ali}, title = {Investigation of Heat Treatment Methods on Microstructure and Hardness of Aluminum-Nickel Bronze Alloy (C95500)}, journal = {Founding Research Journal}, volume = {3}, number = {4}, pages = {247-257}, year = {2020}, publisher = {Iranian Foundrymen's Society}, issn = {2588-5367}, eissn = {2588-5359}, doi = {10.22034/frj.2019.206679.1105}, abstract = {In this paper, the effect of heat treatment on the microstructure behavior and hardness of aluminum nickel bronze alloy (C95500) are investigated. The alloys were heat treated in different heat treatment cycles including quenching, normalization, aging and annealing. The microstructure of the samples studied using light microscopy (OM) and Scanning Electron Microscopy (SEM) and Image J software to observe the percentage of phases in the structure. The hardness properties of the heat treated alloys as well as the microstructural micro hardness were evaluated and tested for the hardness of each phase and their comparison with each other and the effect of the phases on the overall hardness of the samples. The results show that the quenched samples and then aged are associated with increasing hard phases 'β and γ_2 (or δ), increasing these two phases in the alloy improves the hardness properties. The α-Widmanstätten phase is also a hard phase according to the micro hardening results, which increases it increasing hardness in the field. It should be noted that the formation of each of the phases in the microstructure will be subject to the heat treatment required to create that phase, such that aging causes the k-phase, the quenching to create the β phase as well as the normalize to the α-Widmanstätten phase.}, keywords = {Heat treatment,‎Microstructure,‎Nickel aluminum bronze alloy}, title_fa = {بررسی روش‌های عملیات حرارتی بر ریزساختار و سختی آلیاژ برنز آلومینیم-نیکل ‏C95500‎‏ ‏}, abstract_fa = {در این مقاله اثر عملیات حرارتی بر ریزساختار، سختی و میکروسختی آلیاژ برنز-آلومینیم-نیکل (C95500) بررسی شده است. آلیاژ در چرخه‌های دمایی متفاوتی شامل کوئینچ، نرماله، پیرسازی و آنیل، عملیات حرارتی شدند. ریزساختار نمونه‌ها با استفاده از میکروسکوپ‌های نوری مجهز به آنالیز تصویر و الکترونی روبشی  و همچنین نرم افزار Image J جهت مشاهده درصد فازها مورد مطالعه و بررسی قرار گرفته است. سختی آلیاژ عملیات حرارتی شده و هم‌چنین میکروسختی هر فاز و مقایسه آن‌ها با یکدیگر و تأثیر فازها بر سختی کلی نمونه‌ها مورد ارزیابی و آزمایش قرار گرفت. نتایج نشان می‌دهد که نمونه ریختگی شامل فازهای ki، kii، kiii، kiv، α وβ است. عملیات حرارتی پیرسازی باعث به وجود آمدن فازهای k، کوئنچ باعث ایجاد فاز 'β هم‌چنین نرماله نیز باعث ایجاد فاز α ویدمنشتاتن خواهد بود. در نمونه‌های کوئینچ و سپس پیرسازی شده با افزایش فازهای سخت 'β و  (یا δ) همراه است، افزایش این دو فاز در آلیاژ باعث بهبود خواص سختی می‌شود. هم‌چنین حضور فاز سخت α ویدمنشتاتن در زمینه به‌شدت باعث افزایش سختی می‌شود.   }, keywords_fa = {عملیات حرارتی,ریزساختار,آلیاژ برنز آلومینیم نیکل}, url = {https://www.foundingjournal.ir/article_99160.html}, eprint = {https://www.foundingjournal.ir/article_99160_943cf100eb6547a29bd53104230e455a.pdf} }