<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>انجمن علمی ریخته‎ گری ایران</PublisherName>
				<JournalTitle>پژوهشنامه ریخته گری</JournalTitle>
				<Issn>2588-5367</Issn>
				<Volume>2</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2018</Year>
					<Month>11</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Numerical Simulation of Fluid Flow and Lubricant Powder Behavior in ‎Steel ‎Continuous Casting Mold for Improving of Produced Ingot Properties ‎</ArticleTitle>
<VernacularTitle>شبیه‌سازی عددی جریان مذاب و رفتار پودر روانکار در قالب ریخته‌گری پیوسته فولاد آلیاژی به‌منظور بهبود خواص شمش تولیدی</VernacularTitle>
			<FirstPage>181</FirstPage>
			<LastPage>192</LastPage>
			<ELocationID EIdType="pii">81418</ELocationID>
			
<ELocationID EIdType="doi">10.22034/frj.2019.155742.1060</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>مهدی</FirstName>
					<LastName>ازلگینی</LastName>
<Affiliation>دانشجوی کارشناسی ارشد، گروه مهندسی متالورژی و مواد، دانشکده فنی مهندسی گلپایگان</Affiliation>

</Author>
<Author>
					<FirstName>امیر حسین</FirstName>
					<LastName>میثمی</LastName>
<Affiliation>استادیار، گروه مهندسی متالورژی و مواد، دانشکده فنی مهندسی گلپایگان</Affiliation>

</Author>
<Author>
					<FirstName>علی اصغر</FirstName>
					<LastName>فروغی فر</LastName>
<Affiliation>مربی، گروه مهندسی متالورژی و مواد، دانشکده فنی مهندسی گلپایگان</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>11</Month>
					<Day>11</Day>
				</PubDate>
			</History>
		    <Abstract>Many studies have been performed to improve the quality and cleanliness of steel ‎ingots produced by continuous casting process. One of the important defects is entrapping of mold lubricant ‎powder in the ingot. In the paper, the mathematical modeling methods and ‎computational fluid dynamic (CFD) were used to investigate the powder fluid behavior during ‎continuous casting of steel. For this purpose, the factors of powder entrapping and the behavior of the ‎powder in the melt were investigated and some solutions were proposed to prevent these ‎defects. Therefore, the boundary and initial conditions were studied in developed model and the ‎effect of each one were investigated. The results showed ‎that it can be possible to prevent the ‎powder entrapping in the steel ingot by decreasing the casting speed from 0.9 to 0.76 m/min, increasing the nozzle dip depth from ‎‎130 to 140 mm, decreasing the nuzzle diameter from 42 to 36mm, decreasing the powder ‎particles size from 500 to 63 micrometers and by pouring of clean steel melt without the large inclusions.‎</Abstract>
			<OtherAbstract Language="FA">به دلیل استفاده روزافزون از محصولات فولادی، بررسی‌هایی فراوانی برای بالا بردن مشخصه‌های کیفی شمش تولیدی به روش ‏ریخته‌گری پیوسته، انجام‌شده است. در این میان یکی از عیوبی که به وجود می‌آید، حبس پودر روانکار قالب درون شمش تولیدی است. برای کاهش هزینه‌های تولید و افزایش کیفیت محصول، امروزه استفاده از مدل‌‌سازی ریاضی به‌عنوان ابزاری قدرتمند در دست ‏متخصصان برای تحقیق بر روی بهبود فرایند تولید فولاد با کیفیت، قرار گرفته است. در این پژوهش مدل‌سازی و شبیه‌سازی رفتار ‏پودر درون قالب و بررسی نوع حبس پودر درون شمش با استفاده از مدل‌های وابسته به دینامیک سیالات محاسباتی صورت پذیرفته ‏است. ابتدا به بررسی دلایل حبس و نوع رفتار پودر درون مذاب پرداخته شده و سپس راهکارهایی برای جلوگیری از به وجود آمدن ‏این عیب ارائه شده است. لذا شرایط مرزی و اولیه در مدل مذکور بررسی و تأثیر هر کدام بر روی عیوب احتمالی مورد ارزیابی قرار ‏گرفته است. نتایج این تحقیق نشان می‌دهد که با کم‌کردن سرعت ریخته‌گری از 9/0 به 76/0 متر بردقیقه، افزایش عمق ‏غوطه‌وری نازل از 130 به 140 میلیمتر، کاهش قطر نازل از 42 به 36 میلیمتر، کاهش اندازه ذرات پودر از 500 به 63 میکرومتر و ‏تمیز بودن مذاب ورودی از آخال‌های درشت، می‌توان از حبس پودر روانکار درون شمش تولیدی جلوگیری نمود.‏</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">حبس پودر</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">شبیه‌سازی عددی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">فولاد تمیز</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">دینامیک سیالات محاسباتی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ریخته‌گری پیوسته</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.foundingjournal.ir/article_81418_5d99038d44f065c21383e5daea295933.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
