[1] Liu T, Wang Q, Sui Y, Wang Q, Ding W., An investigation into aluminum–aluminum bimetal fabrication by squeeze casting, Materials & Design, 2015, 68, 8–17.
[2] Sun J, Song X, Wang T, Yu Y, Sun M, Cao Z, et al. The microstructure and property of Al – Si alloy and Al – Mn alloy bimetal prepared by continuous casting, Materials Letters, 2012, 67(1) 21–23.
[3] Nazari J, Yousefi M, Kerahroodi MSA, Mofrad NSB, Abhari SHA, Production of copper-aluminum bimetal by using centrifugal casting and evaluation of metal interface, International Journal of Materials Lifetime, 2015, 1(1) 20–28.
[4] Xue P, Xiao BL, Ni DR, Ma ZY, Enhanced mechanical properties of friction stir welded dissimilar Al–Cu joint by intermetallic compounds, Materials Science and Engineering: A, 2010, 527(21–22) 5723–5727.
[5] Akbari-Mousavi SAA, Barrett LM, Al-Hassani STS, Explosive welding of metal plates, Journal of Materials Processing Technology, 2008, 202(1–3) 224–239.
[6] Lee JS, Son HT, Oh IH, Kang CS, Yun CH, Lim SC, et al., Fabrication and characterization of Ti–Cu clad materials by indirect extrusion, Journal of Materials Processing Technology, 2007, 187, 653–656.
[7] Eizadjou M, Manesh HD, Janghorban K, Investigation of roll bonding between aluminum alloy strips, Materials & Design, 2008, 29(4) 909–913.
[8] Guo Y, Liu G, Jin H, Shi Z, Qiao G, Intermetallic phase formation in diffusion-bonded Cu/Al laminates, Journal of materials science, 2011, 46(8) 2467–2473.
[9] Papis KJM, Loeffler JF, Uggowitzer PJ, Light metal compound casting, Science in China Series E: Technological Sciences, 2009, 52(1) 46–51.
[10] Rübner M, Günzl M, Körner C, Singer RF, Aluminium–aluminium compound fabrication by high pressure die casting, Materials Science and Engineering: A, 2011, 528(22–23) 7024–7029.
[11] Babaee MH, Niroumand B, Maleki A, Lashani Zand M, Simulation and experimental verification of interfacial interaction in compound squeeze castingAl/Al-Cu macrocomposite bimetal, Transactions of Nonferrous Metals Society of China, 2019, 29, 950-963.
[12] Bykov AA, Bimetal production and applications, Steel in Translation, 2011, 41(9) 778–786.
[13] Stefanescu DM, Davis JR, Destefani JD, Metals Handbook, Vol. 15-Casting, ASM International, 1988.
[14] Papis KJM, Hallstedt B, Löffler JF, Uggowitzer PJ, Interface formation in aluminium–aluminium compound casting, Acta Materialia, 2008, 56(13) 3036–3043.
[15] Pai B.C., Ramani G, Pillai R.M., Satyanaryana K.G., Review role of magnesium in cast aluminiurn alloy matrix composites, Journal of Materials Science, 1995, 30, 1903–1911.
[16] Saito M, Maegawa T, Homma T, Electrochemical analysis of zincate treatments for Al and Al alloy films, Electrochimica Acta, 2005, 51(5) 1017–20.
[17] Robertson SG, Ritchie IM, Druskovich DM, A kinetic and electrochemical study of the zincate immersion process for aluminium, Journal of Applied Electrochemistry, 1995, 25(7) 659–666.
[18] Pinner R, Sheasby PG, The surface treatment and finishing of aluminum and its alloys, 6 th. editi, ASM International, 2001.
[19] Pai BC, Ramani G, Pillai RM, Satyanarayana KG, Role of magnesium in cast aluminium alloy matrix composites, Journal of Materials Science, 1995, 30(8) 1903–1911.
[20] Pai BC, Ray S, Prabhakar K V, Rohatgi PK, Fabrication of aluminium-alumina (magnesia) particulate composites in foundries using magnesium additions to the melts, Materials Science and Engineering, 1976, 24(1) 31–44.
[21] Dehhaghi A., Boutorabi S.M.A., Nano double oxide film (NDOF) characteristics of A356 alloy casting protected with beryllium in turbulence conditions, in Persian, Founding Research Journal, 2018, 2(2) 71-78.
[22] Li G, Jiang W, Guan F, Zhu J, Zhang Z, Fan Z, Microstructure, mechanical properties and corrosion resistance of A356 aluminum / AZ91D magnesium bimetal prepared by a compound casting combined with a novel Ni-Cu composite interlayer, Journal of Materials Processing Technology, 2021, 288, 1–12.
[23] He K, Zhao J, Cheng J, Shangguan J, Wen F, Wang Y, Influence of a Zn interlayer on the interfacial microstructures and mechanical properties of arc-sprayed Al/AZ91D bimetals manufactured by the solid-liquid compound casting process, Materials, 2019, 12(19) 1–21.
[24] Li G, Jiang W, Guan F, Zhu J, Yu Y, Fan Z, Effect of different Ni interlayers on interfacial microstructure and bonding properties of Al/Mg bimetal using a novel compound casting, Journal of Manufacturing Processes, 2020, 50, 614–628.
[25] Delannay F, Froyen L, Deruyttere A, The wetting of solids by molten metals and its relation to the preparation of metal-matrix composites composites, Journal of Materials Science, 1987, 22(1) 1–16.
[26] Shabestari SG, Shahri F, Influence of modification, solidification conditions and heat treatment on the microstructure and mechanical properties of A356 aluminum alloy, Journal of Materials Science, 2004, 39(6) 2023–2032.
[27] Bertelli F, Brito C, Ferreira IL, Reinhart G, Nguyen-Thi H, Mangelinck-Noël N, et al., Cooling thermal parameters, microstructure, segregation and hardness in directionally solidified Al–Sn-(Si; Cu) alloys, Materials & Design, 2015, 72, 31–42.
[28] Yuan GC, Li ZJ, Lou YX, Zhang XM, Study on crystallization and microstructure for new series of Al–Sn–Si alloys, Materials Science and Engineering: A, 2000, 280(1) 108–115.
[29] Hegde S, Prabhu KN, Modification of eutectic silicon in Al–Si alloys, Journal of Materials Science, 2008, 43(9) 3009–3027.
[30] Nafisi S, Ghomashchi R, Combined grain refining and modification of conventional and rheo-cast A356 Al–Si alloy, Materials Characterization, 2006, 57(4–5) 371–385.
[31] Chen X, Geng H, Li Y, Study on the eutectic modification level of Al-7Si Alloy by computer aided recognition of thermal analysis cooling curves, Materials Science and Engineering A, 2006, 419(1–2) 283–289.
[32] Wang T, Liang C, Chen Z, Zheng Y, Kang H, Wang W, Development of an 8090/3003 bimetal slab using a modified direct-chill casting process, Journal of Materials Processing Technology, 2014, 214(9) 1806–1811.
[33] Fu Y, Jie J, Wu L, Park J, Sun J, Kim J, et al., Microstructure and mechanical properties of Al–1Mn and Al–10Si alloy circular clad ingot prepared by direct chill casting, Materials Science and Engineering: A, 2013, 561, 239–244.
[34] Schmidt P, Heat transfer during filling in die casting processes, Materials Science and Engineering A, 1993, 173(1–2) 271–274.
[35] Sekhar JA, Abbaschian GJ, Mehrabian R, Effect of pressure on metal-die heat transfer coefficient during solidification, Materials Science and Engineering, 1979, 40(1) 105–110.
[36] Karun AS, Hari S, Ebhota WS, Rajan TPD, Pillai UTS, Pai BC, Design and processing of bimetallic aluminum alloys by sequential casting technique, Metallurgical and Materials Transactions A, 2017, 48(1) 279–293.
[37] IbrahimMervat M, El-Hadad S, Mourad M, Effect of liquid-solid volume ratios on the interfacial microstructure and mechanical properties of high chromium cast iron and low carbon steel bimetal, Materials Research Express, 2019, 6(12) 1265c2.
[38] Kliauga AM, Ferrante M, The effect of Sn additions on the semi-solid microstructure of an Al-7Si-0.3Mg alloy, Materials Science and Engineering A, 2002, 337(1–2) 67–72.
[39] Fu H, Xiao Q, Xing J, A study of segregation mechanism in centrifugal cast high speed steel rolls, Materials Science and Engineering A, 2008, 479(1–2) 253–260.
[40] Diouf P, Jones A, Investigation of bond strength in centrifugal lining of babbitt on cast iron, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2010, 41(3) 603–609.
[41] Ghoncheh MH, Shabestari SG, Effect of cooling rate on the dendrite coherency point during solidification of Al2024 alloy, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2015, 46(3) 1287–1299.
[42]Gholami M, Divandari M, Interfacial phases and defects characteristics of Al/Cu/Zn bimetal produced via centrifugal casting process, Iranian Journal of Materials Science and Engineering, 2018, 15(4) 52–61.
[43] Zhang H, Chen Y, Luo AA, Improved interfacial bonding in magnesium/aluminum overcasting systems by aluminum surface treatments, Metallurgical and Materials Transactions B, 2014, 45(6) 2495–2503.
[44] Mcleod A.D, Gabryel CM, Kinetics of the growth of spinel, MgAl204, on alumina particulate in aluminum alloys containing magnesium, Metallurgical Transactions A, 1992, 23A(4) 1279–1283.
[45] He K, Zhao J, Li P, He J, Tang Q, Investigation on microstructures and properties of arc-sprayed-Al/AZ91D bimetallic material by solid–liquid compound casting, Materials & Design, 2016, 112, 553–564.
[46] Divandari M., Campbell J., A new technique for the study of aluminum oxide films, Aluminum Transactions, 2000, 2(2) 233-238.
[47] Liu JC, Hu J, Nie XY, Li HX, Du Q, Zhang JS, et al., The interface bonding mechanism and related mechanical properties of Mg/Al compound materials fabricated by insert molding, Materials Science and Engineering: A, 2015, 635, 70–76.
[48] Abbasi M, Karimi Taheri A, Salehi MT, Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process, Journal of Alloys and Compounds, 2001, 319(1–2) 233–241.
[49]عیسیآبادی ق.، بررسی و کنترل آسیبهای وارد شده به مذاب آلیاژهای آلومینیوم ریختگی در حین آمادهسازی مذاب و ریختهگری، پژوهشنامه ریختهگری، 1400، 5(2) 119-138.
[50] Liu G, Wang Q, Liu T, Ye B, Jiang H, Ding W., Effect of T6 heat treatment on microstructure and mechanical property of 6101/A356 bimetal fabricated by squeeze casting, Materials Science and Engineering: A., 2017, 696, 208–215.
