[1] Lu D., Jiang Y., Guan G., Zhou R.F., Li Z., Zhou R., Refinement of primary Si in hypereutectic Al–Si alloy by electromagnetic stirring, Materials Processing Technology, 2007, 189(1) 13–18.
[2] Zhou H.,The fabrication of functional gradient hypereutectic Al-Si composites by liquid-solid separation technology, Alloys and Compounds, 2018, 763(1) 49-55.
[3] Raghukiran N., Kumar R., Processing and dry sliding wear performance of spray deposited hypereutectic aluminum–silicon alloys, Materials Processing Technology, 2013, 213(1) 401-410.
[4] Reddy T.V.S., Adhesive wear of stir cast hypereutectic Al–Si–Mg alloy under reciprocating sliding conditions, wear, 2009, 266(1), 1-5.
[5] Zuo Y.B., Modification of a hypereutectic aluminium silicon alloy under the influence of intensive melt shearing, Materials Science Forum, 2013, 765(1) 140-144.
[6] Jiao X.Y., Characterization of high-pressure die-cast hypereutectic Al-Si alloys based on microstructural distribution and fracture morphology, Materials Science and Technology, 2019, 35(6) 1099-1107.
[7] Wang Z., On the growth mechanism of the primary silicon particle in a hypereutectic Al-20wt%Si alloy using synchrotron X-ray tomography, Materials and Design, 2018, 137(1) 176-183.
[8] Zhang Y., Enhanced nucleation of primary silicon in Al–20Si (wt%) alloy inoculated with Al–10Si–2Fe master alloy, Materials Letters, 2014, 123(1) 224–228.
[9] Rao A.G., Deshmukh V.P., Prabhu N., Kashyap B.P., Ductilizing of a brittle as-cast hypereutectic Al–Si alloy by friction stir processing, Materials Letters, 2015, 159(1) 417–419.
[10] Ramadan M., Fathy N., Solidification microstructure of rheocast hyper‐eutectic Al-18Si alloy, Metallurgical Engineering, 2013, 2(4) 149-154.
[11] Jeon J.H., Si phase modification on the elevated temperature mechanical properties of Al-Si hypereutectic alloys, Materials Science and Engineering A, 2019, 748(1) 367–370.
[12] رنجبرپور ح.، تاثیر دمای ذوبریزی و گرمایش مجدد بر ریزساختار بر خواص سایشی آلیاژ A390 در ریختهگری روی سطح شیبدار، پژوهشنامه ریختهگری، 1396، 1(1) 37-46.
[13] Ma P., Wei Z.J., Jia Y.D., Zou C.M., Scudino S., Prashanth K.G., Yu Z.S., Yang S.L., Li C.G., Eckert J., Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si, Alloys and Compounds, 2016, 688(1) 88-93.
[14] Choi H., Konishi H., Li X., Al2O3 nanoparticles induced simultaneous refinement and modification of primary and eutectic Si particles in hypereutectic Al–20Si alloy, Materials Science and Engineering A, 2012, 541(1) 159–165.
[15] Chen H.I., Chen J.C., Liao J.J., The influence of shearing conditions on the rheology of semi-solid magnesium alloy, Materials Science and Engineering A, 2008, 487(1) 114–119.
[16] Thuong N.V., Zuhailawati H., Seman A.A., Huy T.D., Dhindaw B.K., Microstructural evolution and wear characteristics of equal channel angular pressing processed semi-solid-cast hypoeutectic aluminum alloys, Materials and Design, 2015, 67(1) 448–456.
[17] Liu Z., Mao W., Liu X., Effect of pouring temperature on fractal dimension of primary phase morphology in semi-solid A356 alloy, Transactions of Nonferrous Metals Society of China, 2009, 19(1) 1098-1103.
[18] راکی ن.، بررسی عاملی روش ریختهگری سطح شیبدار خنکشونده بر ریزساختار و مقادیر سختی آلیاژ آلومینیم A380، پژوهشنامه ریختهگری، 1397، 2(2) 109-121.
[19] Nguyen V.T., Zuhailawati H., Anasyida A.S., Microstructural evolution and wear characteristics of equal channel angular pressing processed semi-solid-cast hypoeutectic aluminum alloys, Materials and Design, 2015, 67(1) 448-456.
[20] Mao W.M., Preparation of semi-solid A390 aluminum alloy slurry through a serpentine pouring channel, Solid State Phenomena, 2019, 285(1) 169-175.
[21] Hu Z.H., Wu G.H., Xu J., Mo W.F., Li Y.L., Liu W.C., Zhang L., Dry wear behavior of rheo-casting Al−16Si−4Cu−0.5Mg alloy, Transactions of Nonferrous Metals Society of China, 2016, 26(1) 2818−2829.
[22] Lashkari O., Ajersch F., Charette A., Chen X.G., Microstructure and rheological behavior of hypereutectic semi-solid Al–Si alloy under lows hear rates compression test, Materials Science and Engineering A, 2008, 492(1) 377–382.
[23] Sukumaran K., Pai B.C., Chakraborty M., The effect of isothermal mechanical stirring on an Al–Si alloy in the semisolid condition, Materials Science and Engineering A, 2004, 369(1) 275–283.
[24] Tzimas E., Zavaliangos A., Evaluation of volume fraction of solid in alloys formed by semisolid processing, Materials Science, 2000, 35(1) 5319–5329.
[25] Carlson K.D., Beckermann C., Determination of solid fraction–temperature relation and latent heat using full scale casting experiments: application to corrosion resistant steels and nickel based alloys, Cast Metals Research, 2012, 25(2) 75-92.
[26] Jeng S.C., Chen S.W., The solidification characteristics of 6061 and A356 aluminum alloys and their ceramic particle-reinforced composites, Acta Materialla, 1997, 45(1) 4887-4899.
[27] Chen S.W., Jeng S.C., Determination of the solidification curves of commercial aluminum alloys, Metallurgical and Materials Transactions A, 1996, 27(9) 2722-2726.
[28] Fredriksson H., Akerlind U., Solidification and Crystallization Processing in Metals and Alloys, John Wiley and Sons, 2012.
[29] Pola A., Microstructure and properties of semi-solid aluminum alloys, Metals, 2018, 8(3) 181-198.
[30] Dao V., Zhao S., Lin W., Zhang C., Effect of process parameters on microstructure and mechanical properties in AlSi9Mg connecting-rod fabricated by semi-solid squeeze casting, Materials Science and Engineering A, 2012, 558(1) 95–102.
[31] Barekar N.S., Dhindaw B.K., Fan Z., Improvement in silicon morphology and mechanical properties of Al–17Si alloy by melt conditioning shear technology, Cast Metals Research, 2010, 23(4) 225-230.
[32] Hu X.G., Zhu Q., Lu H.X., Zhang F., Li D.Q., Midson S.P., Microstructural evolution and thixoformability of semi-solid aluminum 319s alloy during re-melting, Alloys and Compounds, 2015, 649(1) 204-210.
[33] Fu J., Influencing factors of the coarsening behaviors for 7075 aluminum alloy in the semi-solid state, Materials Science, 2018, 53(13) 9790-9805.
[34] Kund N.K., Effect of tilted plate vibration on solidification and microstructural and mechanical properties of semisolid cast and heat-treated A356 Al alloy, Advanced Manufacturing Technology, 2018, 97(5-8) 1617-1626.
[35] Shahani A.J., Ostwald ripening of faceted Si particles in an Al-Si-Cu melt, Materials Science and Engineering A, 2016, 673(1) 307–320.
[36] Atkinson H.V., Liu D., Microstructural coarsening of semi-solid aluminium alloys, Materials Science and Engineering A, 2008, 496(1) 439–446.
[37] Li M., Solidification behavior of 6061 wrought aluminum alloy during rheo-diecasting process with self-inoculation method, Transactions of Nonferrous Metals Society of China, 2018, 28(1) 879-889.
[38] Masoumi F., Jahazi M., Shahriari D., Cormier J., Coarsening and dissolution of g0 precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models, Alloys and Compounds, 2016, 658(1) 981-995.
[39] Paray F., Modification-a parameter to consider in the heat treatment of Al-Si alloys, Cast Metals, 1993, 5(4) 187-198.
[40] Reisi M., Niroumand B.,Effects of stirring parameters on rheocast structure of Al–7.1wt.%Si alloy, Alloys and Compounds, 2009, 470(1) 413–419.
[41] Kaya H., Cadirli E., Boyuk U., Marasli N., Variation of microindentation hardness with solidification and microstructure parameters in the Al based alloys, Applied Surface Science, 2008, 255(1) 3071–3078.
[42] Liu G., Li G., Cai A., Chen Z., The influence of Strontium addition on wear properties of Al–20 wt% Si alloys under dry reciprocating sliding condition, Materials and Design, 2011, 32(1) 121–126.
[43] Hosford W.F., Mechanical Behavior of Materials, Cambridge University Press, 2009.
[44] Shi W.X., Gao B., Tu G.F., Li S.W., Effect of Nd on microstructure and wear resistance of hypereutectic Al–20%Si alloy, Alloys and Compounds, 2010, 508(1) 480–485.
[45] Vijeesh V., Narayan Prabhu K., Review of microstructure evolution in hypereutectic Al–Si alloys and its effect on wear properties, Transactions of the Indian Institute Metals, 2014, 67(1) 1–18.
[46] Wang F., Ma Y., Zhang Z., Cui X., Jin Y., A comparison of the sliding wear behavior of a hypereutectic Al–Si alloy prepared by spray-deposition and conventional casting methods, Wear, 2004, 256(1) 342–345.
[47] Li R., Effect of squeeze casting on microstructure and mechanical properties of hypereutectic Al-xSi alloys, Materials science and technology, 2017, 33(4) 404-410.
[48] Hosseini N., Karimzadeh F., Abbasi M.H., Enayati M.H., Tribological properties of Al6061–Al2O3 nanocomposite prepared by milling and hot pressing, Materials and Design, 2010, 31(10) 4777-4785.
[49] Dinaharan I., Materials characterization microstructure and wear characterization of aluminum matrix composites reinforced with industrial waste fly ash particulates synthesized by friction stir processing, Materials Characterization, 2016, 18(1) 149-158.
[50] Kumar S., Tensile and wear behaviour of in situ Al–7Si/TiB2 particulate composites, wear, 2008, 265(1) 134-142.
[51] Kori S.A., Chandrashekharaiah T.M., Studies on the dry sliding wear behaviour of hypoeutectic and eutectic Al-Si alloys, Wear, 2007, 263(1) 745–755.
