Abadi Marand, Leila Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
Abbasi, Majid Microstructure and Hardness Evaluation of Heat Treated Cast Steel by Eddy Current Nondestructive Method [Volume 1, Issue 3, 2018, Pages 149-160]
Abbasi, Majid Solidification Microstructure of A390 Aluminum Alloy Manufactured by Squeeze Casting Process [Volume 2, Issue 1, 2018, Pages 1-10]
Abbasi, Majid Effect of Squeeze Casting Parameters on Mechanical Properties and Wear Behavior of A356 Aluminium Alloy [Volume 2, Issue 4, 2019, Pages 263-273]
Abbasi, Majid Energy Management in Steelmaking by Electric Arc Furnace Based on OLTC [Volume 4, Issue 1, 2020, Pages 51-67]
Abbasi, Majid Effect of Manganese Content on the as Cast Microstructure of Nodular Cast Iron [Volume 4, Issue 4, 2021, Pages 203-213]
Abbasi, Majid Effect of Inoculation and Casting Modulus on the as Cast Microstructure of Austenitic Manganese Iron with Nodular Graphite [Volume 5, Issue 1, 2021, Pages 19-30]
Abbasi, Majid Effects of Squeeze Casting Parameters on the Microstructure Characteristics of ZAMAK5 Reinforced with Alumina Preform Composite [Volume 6, Issue 3, 2022, Pages 203-212]
Abbasi, Majid Numerical Analysis of the Effects of Squeeze Casting Variables on the Microstructure of the Bimetallic Aluminum/Copper Interface with a Regular 3D Lattice Structure [Volume 9, Issue 2, 2025]
Abbasi, seyed Mahdi Effect of Solutionizing Heat Treatment Duration on the Microstructural Defects of CMSX-4 Single Crystal [Volume 6, Issue 2, 2022, Pages 143-155]
Abbasi, Seyed Mahdi Effect of Melt Holding Time on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 3, Issue 1, 2019, Pages 29-36]
Abbasi, Seyed Mahdi Effect of Carbon Content on the Microstructure and Mechanical Properties of Hyness 25 Superalloy [Volume 4, Issue 3, 2020, Pages 137-143]
Abbasi, Seyed Mahdi Effect of Crucible Type on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 6, Issue 1, 2022, Pages 3-8]
Abbasi, Seyed Mahdi The Effect of Melt Holding Time and Vacuum Pressure on the High Temperature Fatigue Life of Ni Based Hastelloy X Superalloy [Volume 5, Issue 3, 2021, Pages 205-213]
Abbasi, Seyed Mahdi The Evaluation of Thermomechanical and Heat Treatment Parameters on the Microstructure and Tensile Properties of Ti-6Al-2Sn-4Zr-2Mo-0.08Si Alloy [Volume 7, Issue 1, 2023, Pages 45-55]
Abbasi, Seyed Mahdi The Evaluation of Addition of Boron and Zirconium on the Hot Workability of IN 718 Plus Superalloy [Volume 8, Issue 1, 2024, Pages 27-38]
Abbasi, Seyed Mahdi Effects of Cooling Rate after Homogenizing on the Microstructure and Tensile Properties of a New Generation Cobalt Base Superalloy [Volume 8, Issue 2, 2024, Pages 89-97]
Abbasi, Seyed Mahdi Evaluation of the Hot Workability Behavior of AISI 303Se Stainless Steel in Cast and Wrought Conditions Using Tensile Test [(Articles in Press)]
Abbasi, Seyed Mahdi Effect of cold work on the microstructure and mechanical properties of ambient temperature Nimonic 263 superalloy [Volume 9, Issue 1, 2025]
Abbasi, Seyed Mahdi Determination of the Beta Transus Temperature of Near-Alpha Titanium Alloy Ti-8Al-1Mo-1V through Microstructural Examination [(Articles in Press)]
Abbasi, Seyed Mehdi the Impact of Homogenization Treatment on the Microstructure and Hardness of Cast M647 Superalloy [Volume 9, Issue 1, 2025]
Abbasian, Abbas Investigation of Heat Treatment Methods on Microstructure and Hardness of Aluminum-Nickel Bronze Alloy (C95500) [Volume 3, Issue 4, 2020, Pages 247-257]
Abdi, Mohsen The Effect of Inert Gas Injection Semisolid Process on the Structure and Hot Tearing Susceptibility of Al-4.3%Cu Alloy [Volume 3, Issue 1, 2019, Pages 1-10]
Abdi Bejandi, Ehsan To Produce an Advanced Zamak5 Composite with a 3D-Open Cell Copper Foam by Casting Method [Volume 4, Issue 3, 2020, Pages 129-136]
Abdolmaleki, Fatemeh Effect of Withdrawal Rate of Directional Solidification on the Microstructure of a New Cobalt-Nickel Based Superalloy [Volume 7, Issue 1, 2023, Pages 5-14]
Abolhasani, Mohammadamin Investigation of Wear Behavior of A356/SiCnp Nanocomposite in As-cast and Heat-Treated Conditions [Volume 8, Issue 1, 2024, Pages 17-26]
Afrazideh, Mostafa Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
Aghajani, Hossein Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
Aghajani, Hossein An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
Aghajani, Hossein Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
Aghazadeh, Ebrahim The Effect of Silicon Content on the Graded Microstructure of Centrifugally Cast Al-Si Alloys [Volume 1, Issue 2, 2017, Pages 89-97]
Aghazadeh, Ebrahim Establishment of Graded Hybrid Microstructure Through Centrifugal Casting of a Hypereutectic Al-Mg2Si Alloy [Volume 2, Issue 2, 2018, Pages 79-88]
Aghazadeh, Ebrahim Effect of Magnesium Content on Functionally Graded Microstructure and Hardness of Centrifugally cast Al-20Si-XMg Composites [Volume 3, Issue 2, 2019, Pages 55-66]
Aghazadeh, Jamshid Investigation of the effect of misorientation grain growth on the creep behavior of nickel-based GTD111DS superalloy [Volume 5, Issue 2, 2021, Pages 79-92]
Aghazadeh, Jamshied Investigation of Heat Transfer Coefficients Effects in Directional Solidification of GTD111 Super-alloy [Volume 3, Issue 1, 2019, Pages 11-20]
Aghazadeh, Sayfolah The Effect of Silicon Content on the Graded Microstructure of Centrifugally Cast Al-Si Alloys [Volume 1, Issue 2, 2017, Pages 89-97]
Aghazadeh, Sayfolah Establishment of Graded Hybrid Microstructure Through Centrifugal Casting of a Hypereutectic Al-Mg2Si Alloy [Volume 2, Issue 2, 2018, Pages 79-88]
Aghazadeh, Sayfolah Effect of Magnesium Content on Functionally Graded Microstructure and Hardness of Centrifugally cast Al-20Si-XMg Composites [Volume 3, Issue 2, 2019, Pages 55-66]
Ahmadi, Reza Effect of Severe Plastic Deformation on Mechanical Properties and Microstructure of A520 Al-Alloy Produced by Semisolid and Ordinary Casting [Volume 1, Issue 1, 2017, Pages 9-21]
Ahmadzadeh-salvat, Shima Production and Characterization of Properties of Al Matrix Composite Reinforced with integrated ordered Cu Lattice Structure [Volume 7, Issue 1, 2023, Pages 57-68]
Akbari, Faezeh Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite [Volume 6, Issue 1, 2022, Pages 53-65]
Akbari, Faezeh Investigation of Effect of Mold Mechanical Vibration During Solidification on the Structure and Corrosion Resistance of Zn-4Si Alloy [Volume 6, Issue 2, 2022, Pages 157-167]
Akbarifar, Mehdi Investigation of Oxide Film Characteristics in Al-Zn Melt by Oxide-Metal-Oxide Technique [Volume 3, Issue 3, 2019, Pages 131-140]
Akhondzadeh, Adli Effect of Carbon Content on the Microstructure and Mechanical Properties of Hyness 25 Superalloy [Volume 4, Issue 3, 2020, Pages 137-143]
Akhondzadeh, Adli Evaluation of the Effect of Carbon and Solution Treatment on the Microstructure and Mechanical Properties of ASTM F75 Cast Co Based Alloy [Volume 6, Issue 1, 2022, Pages 35-44]
Akhondzadeh, Adly Determination of the Beta Transus Temperature of Near-Alpha Titanium Alloy Ti-8Al-1Mo-1V through Microstructural Examination [(Articles in Press)]
Akhundzada, Adly Effect of cold work on the microstructure and mechanical properties of ambient temperature Nimonic 263 superalloy [Volume 9, Issue 1, 2025]
Aliabadi, Mohsen Investigating the Effect of Rapid Heating on Microstructure and Tensile Properties of Phosphorus Modified Alloy Al-Si-Cu-Mg [Volume 4, Issue 2, 2020, Pages 71-78]
Aliakbari Sani, Saeed An Investigation in the Present Phases in a Cast Co-Al-W Cobalt-Base Superalloy Using Experimental Methods and JMatPro Software [Volume 2, Issue 1, 2018, Pages 27-37]
Alinejad, Hossein Effect of As Cast Microstructure on Recrystallization and Recovery Processes of 2304 Duplex Stainless Steel [Volume 2, Issue 3, 2018, Pages 201-209]
Alireza, Mirak Effect of directional solidification on the microstructure and mechanical properties of a 2th Generation Ni-base single crystal superalloy CMSX-4 [Volume 3, Issue 4, 2020, Pages 187-199]
Alishahi, Mostafa Investigation of Mechanical Properties and in vitro Corrosion Rate of Open-Cell Cast Magnesium Foams [Volume 4, Issue 3, 2020, Pages 155-165]
Alizadeh, Mostafa Investigating the Hot Tear Formation in Eutectic Al-Fe Alloys in Mushy Temperatures Ranges by Simulation of Solidification [Volume 3, Issue 2, 2019, Pages 101-112]
Alizadeh, Mostafa Effect of Melt Shearing Time by Vertical Spiral Stirrer on Hot Tearing Behavior of A206 Alloy [Volume 6, Issue 1, 2022, Pages 23-34]
Amini, Ilia To Produce an Advanced Zamak5 Composite with a 3D-Open Cell Copper Foam by Casting Method [Volume 4, Issue 3, 2020, Pages 129-136]
Amini, Kamran Effect of Shot-Peening on the Wear Behavior of Two Types of High Manganese Austenitic Steel [Volume 1, Issue 2, 2017, Pages 121-132]
Amini, Saeid The Effect of Surface Severe Plastic Deformation on Microstructure and Mechanical Properties of Pure Titanium Produced by Selective Laser Melting [Volume 7, Issue 1, 2023, Pages 15-24]
Amiri, Morteza Investigating the Effect of Superheat Temperature and Modification on the Columnar to Equiaxed Transition of Al-Si Eutectic Alloy [Volume 8, Issue 1, 2024, Pages 5-15]
Ansarian, Iman Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite [Volume 6, Issue 1, 2022, Pages 53-65]
Ansarian, Iman Investigation of Effect of Mold Mechanical Vibration During Solidification on the Structure and Corrosion Resistance of Zn-4Si Alloy [Volume 6, Issue 2, 2022, Pages 157-167]
Ansarian, Iman The Effect of Surface Severe Plastic Deformation on Microstructure and Mechanical Properties of Pure Titanium Produced by Selective Laser Melting [Volume 7, Issue 1, 2023, Pages 15-24]
Antanessian, Sibri Yana Investigation on the Effect of Solidification Parameters on Microstructural Characteristics and Hardness of Al-Fe Alloy Produced by Directional Solidification in Bridgeman Furnace [Volume 1, Issue 1, 2017, Pages 1-8]
Arab, Najmeddin Effect of Heating Temperature and Mixing Rate in Mixing Ladle on Recycling of Aluminum Slag From Melting Furnace [Volume 4, Issue 1, 2020, Pages 31-37]
Arab, Najmodin Effect of Zirconium and Heat Treatment on Microstructure and Wear Properties of High Manganese Steels [Volume 5, Issue 3, 2021, Pages 185-192]
Arabi, Hossein Effect of Solution Cooling Rate on Microstructure and Hardness of X-750 Superalloy [Volume 4, Issue 3, 2020, Pages 145-153]
Arabi, Hossien An Investigation in the Present Phases in a Cast Co-Al-W Cobalt-Base Superalloy Using Experimental Methods and JMatPro Software [Volume 2, Issue 1, 2018, Pages 27-37]
Araghchi, Masoud Simulation of Direct Chill Casting in the Presence of Low Frequency Magnetic Field to Produce 7075 Aluminum Alloy Billets [Volume 5, Issue 3, 2021, Pages 193-204]
Asadi, Jaber Investigation of Mechanical Properties and in vitro Corrosion Rate of Open-Cell Cast Magnesium Foams [Volume 4, Issue 3, 2020, Pages 155-165]
Asghari, Fatemeh A review on the investment casting process in the arts and jewelry industries [Volume 5, Issue 2, 2021, Pages 139-159]
Asgharzadeh, Peyman Investigation on the Effect of Solidification Parameters on Microstructural Characteristics and Hardness of Al-Fe Alloy Produced by Directional Solidification in Bridgeman Furnace [Volume 1, Issue 1, 2017, Pages 1-8]
Ashkevary, Sahar Investigation on Effects of Melt Temperature on Solidification Behavior of in-situ Al-Mg2Si Composite using Cooling Curve Thermal Analysis [Volume 4, Issue 1, 2020, Pages 1-9]
Ashuri, Gholamreza Assessment of Bismuth and T6-Heat Treatment on The Microstructural Evaluation and Tensile Properties of SiC Nano Particle-Reinforced Al–Si Alloy (LM13) [Volume 2, Issue 2, 2018, Pages 123-134]
Ashuri, Gholamreza Modification Effect of Nickel on Tensile Properties and Microstructural Characterization of Al-12%Si-1%Mg-1%Cu Alloy [Volume 3, Issue 2, 2019, Pages 113-121]
B
Babaei Sodani, Ramin Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
Baghshahi, Saeed An Investigation on the Effect of Mn on the Castability of Hypoeutectic Al-2Ni-xMn Alloys [Volume 1, Issue 2, 2017, Pages 69-78]
Baghshahi, Saeed Investigation of microstructure and mechanical properties of Al-2Ni-xMn alloys as substitute for hypoeutectic Al-4Ni alloy [Volume 5, Issue 1, 2021, Pages 51-62]
Baharvandi, Hamid Reza Evaluation of Foam Defects in A356 Aluminium Alloy Produced with TiH2 and CaCO3 Foaming Agents Without Stabilized Ceramic Particles [Volume 2, Issue 1, 2018, Pages 71-80]
Bakhtiari, Ali Investigation of AISI 321/Al Interface in Compound Casting at 840 °C [Volume 7, Issue 1, 2023, Pages 35-44]
Bakhtiari, Reza Optimization of Magnesium Solubility Factor in Production of Ductile Iron using Gating System Addition Method [Volume 3, Issue 1, 2019, Pages 37-43]
Baniasadi, Yeganeh Synthesis and Characterization of Lightweight Al35Mg35Mn2Sn8Zn20 Entropic Alloy [Volume 7, Issue 1, 2023, Pages 25-34]
Baradaran Mehrabadi, H. Effect of Immersion Time and Temperature on the Interface Characteristics of Pure Aluminium and Plain Carbon Steel [Volume 2, Issue 1, 2018, Pages 55-69]
Bayat, Omid Determination of Critical Pressure and Impeding Pressure for Manganese Evaporation During the Induction Melting Process of Manganese-Nickel Alloys [Volume 3, Issue 2, 2019, Pages 67-74]
Bayat, Omid Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
Behrangi, Sahand An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
Beigie Kheradmand, Azam Effect of Minor Amount of Scandium on the Microstructure of 7000 Series Aluminium in as Cast, Homogenized and Artificial Age Hardened Conditions [Volume 2, Issue 4, 2019, Pages 211-226]
Boutorabi, Seyed Mohammad Ali Effect of Austempering Time and Temperature on the Microstructure and Hardness of Bainitic Silicon Steel [Volume 1, Issue 2, 2017, Pages 79-87]
Boutorabi, Seyed Mohammad Ali Nano Double Oxide Film (NDOF) Characteristics of A356 Alloy Casting Protected With Beryllium in Turbulence Conditions [Volume 2, Issue 2, 2018, Pages 71-78]
Boutorabi, Seyed Mohammad Ali Investigation of Microstructure and Hardness of upper Bainitic Austempered Aluminum Ductile Iron (Fe-3.4C-4.3Al-Mg) [Volume 3, Issue 2, 2019, Pages 75-90]
Boutorabi, Seyed Mohammad Ali Effect of Solution Cooling Rate on Microstructure and Hardness of X-750 Superalloy [Volume 4, Issue 3, 2020, Pages 145-153]
Boutorabi, Seyed Mohammad Ali Effect of Sb addition and casting modulus on graphite morphology, microstructure and mechanical properties of ductile cast iron [Volume 5, Issue 2, 2021, Pages 67-77]
Boutorabi, Seyed Mohammad Ali The Effect of CeO2 and Hf Additives as a Grain Refinement on the Microstructure and Hardness of Austenitic Manganese Steel [Volume 5, Issue 3, 2021, Pages 165-174]
D
Daghmechi, Hamed Determination of the Beta Transus Temperature of Near-Alpha Titanium Alloy Ti-8Al-1Mo-1V through Microstructural Examination [(Articles in Press)]
Damadi, Seyyed Reza Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
Damadi, Seyyed Reza Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
Damavandi, Esmaeil The Effect of Pouring Temperature, Mechanical Vibration and Partial Remelting on Microstructure and Mechanical Properties of Al-A390 Alloy [Volume 2, Issue 1, 2018, Pages 39-53]
Daneshifar, MohammadHassan Effect of Stirring Temperature on the Morphology of Primary Si Particles, Hardness and Wear Behavior of Al-20wt.%Si Alloy Prepared by Semi-Solid Stir Casting [Volume 3, Issue 3, 2019, Pages 151-162]
Daneshifar, MohammadHassan Synthesis and Characterization of Lightweight Al35Mg35Mn2Sn8Zn20 Entropic Alloy [Volume 7, Issue 1, 2023, Pages 25-34]
Daneshzadeh, Majid Investigating the Interface Characteristics of Al- A356/ Al15Sn4Si1Mg Bimetal Produced by Centrifugal Casting Method [Volume 9, Issue 2, 2025]
Dargi, Hasan Thermal Simulation of Laser Cladding Process of High Entropy Alloy TiNiCrMoW-ZrB2 Coating on IN738 Superalloy [Volume 9, Issue 2, 2025]
Dastbaz, Ehsan Numerical simulation of solidification microstructure in selective laser melting additive manufacturing and studying the effect of process parameters on grains morphologies [Volume 3, Issue 4, 2020, Pages 229-236]
Davari, Mohadeseh Thermodynamic Modeling of the Melting Behavior of Metallic Nanoparticles Embedded in a Matrix [Volume 4, Issue 4, 2021, Pages 227-236]
Davodi, Ali Investigation of Heat Treatment Methods on Microstructure and Hardness of Aluminum-Nickel Bronze Alloy (C95500) [Volume 3, Issue 4, 2020, Pages 247-257]
Dehhaghi, Ali Investigation on the effect of running system design on the melt flow and feeding of a hollow cylinder of A356 Al alloy by simulation [Volume 1, Issue 3, 2018, Pages 133-148]
Dehhaghi, Ali Nano Double Oxide Film (NDOF) Characteristics of A356 Alloy Casting Protected With Beryllium in Turbulence Conditions [Volume 2, Issue 2, 2018, Pages 71-78]
Delshekasteh, Nima Statistical Approach on Microstructure and Hardness of Semi-Solid Cast Aluminum Alloy A380 Produced by Mechanical Vibration in
Argon Gas Atmosphere [Volume 2, Issue 4, 2019, Pages 275-286]
Divandari, Mehdi The Effect of Pouring Temperature on Graphitization of Cast Bars Produced by in-Mold Lost Foam Process [Volume 1, Issue 1, 2017, Pages 23-35]
Divandari, Mehdi Investigation on the effect of running system design on the melt flow and feeding of a hollow cylinder of A356 Al alloy by simulation [Volume 1, Issue 3, 2018, Pages 133-148]
Divandari, Mehdi Effect of Immersion Time and Temperature on the Interface Characteristics of Pure Aluminium and Plain Carbon Steel [Volume 2, Issue 1, 2018, Pages 55-69]
Divandari, Mehdi Effects of Aluminum Content on Microstructure and Matrix Hardness of Spherical Graphite Cast Irons Produced by in-Mold Process [Volume 2, Issue 4, 2019, Pages 251-261]
Divandari, Mehdi Optimization of Magnesium Solubility Factor in Production of Ductile Iron using Gating System Addition Method [Volume 3, Issue 1, 2019, Pages 37-43]
Divandari, Mehdi Investigation of Oxide Film Characteristics in Al-Zn Melt by Oxide-Metal-Oxide Technique [Volume 3, Issue 3, 2019, Pages 131-140]
E
Ebrahimi, Golamreza An Investigation in the Present Phases in a Cast Co-Al-W Cobalt-Base Superalloy Using Experimental Methods and JMatPro Software [Volume 2, Issue 1, 2018, Pages 27-37]
Eftekhari, Meisam Numerical and Experimental Investigation of Solidification Microstructure in Resistance Spot Welding of Haynes 230 Superalloy [Volume 9, Issue 1, 2025]
Ehsani, Naser Evaluation of Foam Defects in A356 Aluminium Alloy Produced with TiH2 and CaCO3 Foaming Agents Without Stabilized Ceramic Particles [Volume 2, Issue 1, 2018, Pages 71-80]
Eisaabadi, Ghasem Effect of Calcium on Oxidation Resistance and Fluidity of Magnesium Alloy AZ91 [Volume 2, Issue 3, 2018, Pages 193-200]
Eisaabadi, Ghasem Assessment and Control of the Damages to Cast Al Alloys During Melt Preparation and Casting [Volume 5, Issue 2, 2021, Pages 119-138]
Etminan, Mostafa Evolution of Aging Treatment Effect on the Microstructure and Hardness of a Co-Al-W-Ti-Ta Based Superalloy [Volume 4, Issue 2, 2020, Pages 89-98]
Etminan, Mostafa Effect of Aging on the High Temperature Mechanical Properties of a Novel Co-7Al-7W-4Ti-2Ta Superalloy [Volume 4, Issue 4, 2021, Pages 193-201]
Ezatpour, Hamidreza Mechanical Properties, Corrosion and Microstructure of Mg/2FA/0.3GNPs (wt.%) Hybrid Nanobiocomposite Produced by Mechanical Stir Casting and Remelting under Argon Pressure [Volume 3, Issue 4, 2020, Pages 201-216]
Ezlegeni, Mahdi Numerical Simulation of Fluid Flow and Lubricant Powder Behavior in Steel Continuous Casting Mold for Improving of Produced Ingot Properties [Volume 2, Issue 3, 2018, Pages 181-192]
F
Fallah, Parastoo The Effect of Precipitation Hardening on Microstructural Characteristics of Directionally Solidified Nickel-Based Superalloy GTD-111 [Volume 1, Issue 2, 2017, Pages 109-120]
Fallah, Parastoo The Effect of Withdrawal Rate on the Microstructure of Ni-based Superalloy GTD-111 through the Directional Solidification [Volume 4, Issue 4, 2021, Pages 237-246]
Farahany, Saeed Using Thermal Analysis and Interrupted Quenching Technique to Examine Interactive Effect of Bi-Sr on Porosity Formation Characteristics in Al-7Si-0.4Mg Alloy [Volume 1, Issue 3, 2018, Pages 181-191]
Farahany, Saeed Synergy Effect of Bi Addition, Cooling Condition and Artificial Aging on Performance of Al-8Si-0.3Mg Cast Alloy [Volume 2, Issue 3, 2018, Pages 147-160]
Farahany, Saeed Simultaneous Effect of Melt Superheating and Holding Time on Structural Changes, Solidification Characteristics, and Hardness of Al-20Mg2Si-2Cu Composite [Volume 5, Issue 2, 2021, Pages 93-106]
Farahany, Saeed The Role of Barium in Structural Changes, Mechanical Properties, and Wear Behavior of Al-20Mg2Si Composite [Volume 6, Issue 1, 2022, Pages 9-21]
Farajollahi, Ramezanali Investigation of the Effect of Heating Rate in Non-isothermal Aging Heat Treatment on the Microstructure and Mechanical Properties of in-situ Aluminum-Nickel Aluminide Composite [Volume 6, Issue 3, 2022, Pages 183-194]
Farzammehr, Navid An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
Fazeli, Hamid Prediction of Shrinkage Porosity and its Remedy by Numerical Simulation in
a Conical Carbon Steel Casting [Volume 4, Issue 1, 2020, Pages 39-50]
Foroughifar, Aliasghar Numerical Simulation of Fluid Flow and Lubricant Powder Behavior in Steel Continuous Casting Mold for Improving of Produced Ingot Properties [Volume 2, Issue 3, 2018, Pages 181-192]
G
Ghandvar, Hamidreza Simultaneous Effect of Melt Superheating and Holding Time on Structural Changes, Solidification Characteristics, and Hardness of Al-20Mg2Si-2Cu Composite [Volume 5, Issue 2, 2021, Pages 93-106]
Ghandvar, Hamidreza The Role of Barium in Structural Changes, Mechanical Properties, and Wear Behavior of Al-20Mg2Si Composite [Volume 6, Issue 1, 2022, Pages 9-21]
Ghaniabadi, Ehasn Effect of Semi-Solid Rotating Container Process on Characteristics of Solidification, Dendrite Coherency and Microstructure of AZ91 Magnesium Alloy [Volume 2, Issue 3, 2018, Pages 135-146]
Ghayour, Hamid Effect of Tungsten on the Hardness and Impact Resistance of Ni-Hard 4 Cast Iron [Volume 3, Issue 2, 2019, Pages 91-99]
Ghazi mir Saeed, seyed Mahdi Evolution of Aging Treatment Effect on the Microstructure and Hardness of a Co-Al-W-Ti-Ta Based Superalloy [Volume 4, Issue 2, 2020, Pages 89-98]
Ghazi mir Saeed, Seyed Mahdi Effect of Crucible Type on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 6, Issue 1, 2022, Pages 3-8]
Ghazi mir Saeed, Seyed Mahdi Effect of Withdrawal Rate of Directional Solidification on the Microstructure of a New Cobalt-Nickel Based Superalloy [Volume 7, Issue 1, 2023, Pages 5-14]
Ghazi Mir Saeed, Seyed Mahdi Effect of Melt Holding Time on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 3, Issue 1, 2019, Pages 29-36]
Ghazi Mir Saeed, Seyed Mahdi Effect of Aging on the High Temperature Mechanical Properties of a Novel Co-7Al-7W-4Ti-2Ta Superalloy [Volume 4, Issue 4, 2021, Pages 193-201]
Ghazi Mir Saeed, Seyed Mahdi The Effect of Melt Holding Time and Vacuum Pressure on the High Temperature Fatigue Life of Ni Based Hastelloy X Superalloy [Volume 5, Issue 3, 2021, Pages 205-213]
Gholami, Hedayat Effect of Temperature Variations, Thermal Stresses and Region of Meniscus of Copper Mold on Quality of Billet Produced by Continuous Casting Process of Steel [Volume 2, Issue 4, 2019, Pages 227-237]
H
Hadi, Morteza Determination of Critical Pressure and Impeding Pressure for Manganese Evaporation During the Induction Melting Process of Manganese-Nickel Alloys [Volume 3, Issue 2, 2019, Pages 67-74]
Hadi, Morteza Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
Hamidi, Elnaz Evaluation of the Microstructure and Wear Properties of A356/Al2O3 Nanocomposite Produced by Stir Casting Method [Volume 1, Issue 1, 2017, Pages 59-68]
Hanachi, Mehrdad The Effects of Cooling Rate after Solutionizing on the Microstructural Evaluation of Cast IN718 Superalloy during Long-Term Thermal Exposure [Volume 4, Issue 3, 2020, Pages 175-184]
Hasasi, Seyed Abbas Solidification Microstructure of A390 Aluminum Alloy Manufactured by Squeeze Casting Process [Volume 2, Issue 1, 2018, Pages 1-10]
Hassanpour, Hossein Effect of Hot Pressing on the Microstructure and Hardness of A390 Cast Aluminum Alloy [Volume 6, Issue 2, 2022, Pages 133-141]
Hassasi, Seyed Abbas Effect of Squeeze Casting Parameters on Mechanical Properties and Wear Behavior of A356 Aluminium Alloy [Volume 2, Issue 4, 2019, Pages 263-273]
Hassasi, Seyed Abbas Numerical Analysis of the Effects of Squeeze Casting Variables on the Microstructure of the Bimetallic Aluminum/Copper Interface with a Regular 3D Lattice Structure [Volume 9, Issue 2, 2025]
Heidari Ghaleh, Milad Evaluation of Foam Defects in A356 Aluminium Alloy Produced with TiH2 and CaCO3 Foaming Agents Without Stabilized Ceramic Particles [Volume 2, Issue 1, 2018, Pages 71-80]
Hesami, Leila Investigation of the Effect of Copper on Microstructural Modification and Quality Index of Al-15Mg2Si Composite [Volume 3, Issue 4, 2020, Pages 217-227]
Heydari, Asghar Prediction of Shrinkage Porosity and its Remedy by Numerical Simulation in
a Conical Carbon Steel Casting [Volume 4, Issue 1, 2020, Pages 39-50]
Homayounjam, Nazanin A review on the investment casting process in the arts and jewelry industries [Volume 5, Issue 2, 2021, Pages 139-159]
Hoseini, Seyed Alireza Investigation of Mechanical Properties and in vitro Corrosion Rate of Open-Cell Cast Magnesium Foams [Volume 4, Issue 3, 2020, Pages 155-165]
Hosseini, Shabnam Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
Hosseini-Jebeli, Hasan The influence of Solid Fraction on the Microstructural Evolution and Mechanical Properties of in situ Mg/Mg2Si Composite Produced by Semi-Solid Casting Process [Volume 6, Issue 3, 2022, Pages 171-182]
Hosseinipour, Seyed Jamal Effect of Pouring Temperature and Partial Remelting on Microstructure and Wear Properties of A390 Alloy in Slope Cooling Casting [Volume 1, Issue 1, 2017, Pages 37-46]
Hosseinipour, Seyed Jamal Solidification Microstructure of A390 Aluminum Alloy Manufactured by Squeeze Casting Process [Volume 2, Issue 1, 2018, Pages 1-10]
Hosseinipour, Seyed Jamal Effect of Squeeze Casting Parameters on Mechanical Properties and Wear Behavior of A356 Aluminium Alloy [Volume 2, Issue 4, 2019, Pages 263-273]
Hosseinipour, Seyed Jamal Effects of Squeeze Casting Parameters on the Microstructure Characteristics of ZAMAK5 Reinforced with Alumina Preform Composite [Volume 6, Issue 3, 2022, Pages 203-212]
Hosseinipour, Seyed Jamal Numerical Analysis of the Effects of Squeeze Casting Variables on the Microstructure of the Bimetallic Aluminum/Copper Interface with a Regular 3D Lattice Structure [Volume 9, Issue 2, 2025]
Hosseinzadeh, Mohammad Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
I
Isfahani, Taghi Effect of Tungsten on the Hardness and Impact Resistance of Ni-Hard 4 Cast Iron [Volume 3, Issue 2, 2019, Pages 91-99]
Isfahani, Taghi Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
J
Jabbareh, Mohammad Amin Thermodynamic Modeling of the Melting Behavior of Metallic Nanoparticles Embedded in a Matrix [Volume 4, Issue 4, 2021, Pages 227-236]
Jabbareh, Mohammad Amin Calculation of phase diagrams using "Jarvis" algorithm [Volume 5, Issue 1, 2021, Pages 41-50]
Jabbareh, Mohammad Amin Synthesis and Characterization of Lightweight Al35Mg35Mn2Sn8Zn20 Entropic Alloy [Volume 7, Issue 1, 2023, Pages 25-34]
Jadidi, Ali Effect of Solutionizing Heat Treatment Duration on the Microstructural Defects of CMSX-4 Single Crystal [Volume 6, Issue 2, 2022, Pages 143-155]
Jafari, Negar Investigating of Wettability Modification Methods on Microstructure and Mechanical Properties of Silicon Carbide/ Aluminum Composite Produced by Stir Casting [Volume 3, Issue 1, 2019, Pages 21-28]
Jafari-Ramiani, Amin Non-linear Standard Model for Optimization of Charge Materials in Crucible and Induction Melting Furnaces [Volume 5, Issue 2, 2021, Pages 107-118]
Jafarzadegan, Mostafa Effect of Si on Castability of Al-Cu-Si Alloys [Volume 4, Issue 4, 2021, Pages 215-226]
Jamaati, Roohollah Effect of Hot Pressing on the Microstructure and Hardness of A390 Cast Aluminum Alloy [Volume 6, Issue 2, 2022, Pages 133-141]
Jamaati, Roohollah Investigation of the Effect of Heating Rate in Non-isothermal Aging Heat Treatment on the Microstructure and Mechanical Properties of in-situ Aluminum-Nickel Aluminide Composite [Volume 6, Issue 3, 2022, Pages 183-194]
Jamshidi Aval, Hamed Investigation of the Effect of Heating Rate in Non-isothermal Aging Heat Treatment on the Microstructure and Mechanical Properties of in-situ Aluminum-Nickel Aluminide Composite [Volume 6, Issue 3, 2022, Pages 183-194]
Javahery, Mojtaba Microstructure and Hardness Evaluation of Heat Treated Cast Steel by Eddy Current Nondestructive Method [Volume 1, Issue 3, 2018, Pages 149-160]
Javahery, Mojtaba Effect of Manganese Content on the as Cast Microstructure of Nodular Cast Iron [Volume 4, Issue 4, 2021, Pages 203-213]
K
Kachuee, Nima The Effect of Melt Holding Time and Vacuum Pressure on the High Temperature Fatigue Life of Ni Based Hastelloy X Superalloy [Volume 5, Issue 3, 2021, Pages 205-213]
Kalvand, Hamed Properties of SAE660 Bronze Bearing at Four Different Casting Conditions [Volume 2, Issue 2, 2018, Pages 89-100]
Karbasian, Gholamreza Prediction of Shrinkage Porosity and its Remedy by Numerical Simulation in
a Conical Carbon Steel Casting [Volume 4, Issue 1, 2020, Pages 39-50]
Karimi, Hadi Determination of Critical Pressure and Impeding Pressure for Manganese Evaporation During the Induction Melting Process of Manganese-Nickel Alloys [Volume 3, Issue 2, 2019, Pages 67-74]
Karimian, Majid Experimental Investigation of Effective Parameters on Gas Exhaust from the Mold in Lost Foam Casting Method [Volume 1, Issue 3, 2018, Pages 161-170]
Karimifar, Sina Properties of SAE660 Bronze Bearing at Four Different Casting Conditions [Volume 2, Issue 2, 2018, Pages 89-100]
Karimi Taghanaki, Ali Effect of Tungsten on the Hardness and Impact Resistance of Ni-Hard 4 Cast Iron [Volume 3, Issue 2, 2019, Pages 91-99]
Kebriyaei, Amir The Effect of Precipitation Hardening on Microstructural Characteristics of Directionally Solidified Nickel-Based Superalloy GTD-111 [Volume 1, Issue 2, 2017, Pages 109-120]
Kebriyaei, Amir The Effect of Withdrawal Rate on the Microstructure of Ni-based Superalloy GTD-111 through the Directional Solidification [Volume 4, Issue 4, 2021, Pages 237-246]
Kermanpur, Ahmad Effect of directional solidification on the microstructure and mechanical properties of a 2th Generation Ni-base single crystal superalloy CMSX-4 [Volume 3, Issue 4, 2020, Pages 187-199]
Khalvan, Mohammad Mehdi Effects of Aluminum Content on Microstructure and Matrix Hardness of Spherical Graphite Cast Irons Produced by in-Mold Process [Volume 2, Issue 4, 2019, Pages 251-261]
Khani, Masood Mechanical Properties, Corrosion and Microstructure of Mg/2FA/0.3GNPs (wt.%) Hybrid Nanobiocomposite Produced by Mechanical Stir Casting and Remelting under Argon Pressure [Volume 3, Issue 4, 2020, Pages 201-216]
Kheirabi, Ali Effect of the Ablation Casting Binder Type on Improving the Tensile Strength of A356 Aluminum Alloy [Volume 5, Issue 3, 2021, Pages 175-183]
Kheirandish, Shahram Effect of Austempering Time and Temperature on the Microstructure and Hardness of Bainitic Silicon Steel [Volume 1, Issue 2, 2017, Pages 79-87]
Kheirandish, Shahram An Investigation in the Present Phases in a Cast Co-Al-W Cobalt-Base Superalloy Using Experimental Methods and JMatPro Software [Volume 2, Issue 1, 2018, Pages 27-37]
Khiabani, Arash Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
Khiabani, Arash The Effects of Cooling Rate after Solutionizing on the Microstructural Evaluation of Cast IN718 Superalloy during Long-Term Thermal Exposure [Volume 4, Issue 3, 2020, Pages 175-184]
Khodabandeh, Alireza Effect of Sample Diameter and Withdrawal Rate on Microstructure and Hot Tensile Behavior of Directionally Solidified PWA 1483 Superalloy [Volume 3, Issue 3, 2019, Pages 175-185]
Khorsand, Hamid Investigating the Microstructure, Mechanical and Thermal Properties of CuNiAlCrFe High Entropy Alloy Made by VAR Method [Volume 8, Issue 2, 2024, Pages 107-115]
Khorsand, Hamid Investigating the Microstructure and Phase Analysis of High Entropy alloy CoCuFeMnNi Made by Vacuum Induction Furnace [Volume 8, Issue 2, 2024, Pages 117-124]
Khorsand, Hamid A Review of Deformation Mechanisms and Microstructure Engineering in Solid Solutions Based on CoCrNi [Volume 8, Issue 1, 2024, Pages 51-76]
Khorsand, Hamid High-entropy alloy AlCoCrFeNi: Study and investigation of the microstructure of the alloy produced by vacuum arc remelting process [Volume 9, Issue 1, 2025]
Khorsand, Hamid A Review of Casting Processes for High Entropy Alloys [Volume 7, Issue 2, 2023]
Kiani-Rashid, Ali-Reza Design of Refractory High-Entropy Alloys to Reduce Weight and Cost [Volume 4, Issue 3, 2020, Pages 167-173]
Kianvash, Abbas Effects of Chemical Composition and Heat Treatment Conditions on the Magnetic Properties and Microstructure of Cast Fe–Cr–Co Magnets [Volume 4, Issue 1, 2020, Pages 11-20]
Kianvash, Abbas Comparison of Ti and Nb Microalloy Addition on the Microstructure and Mechanical Properties of a Quenched-Partitioned Cast Steel [Volume 5, Issue 1, 2021, Pages 31-40]
Kolagar, Ali Mohammad Numerical and Experimental Investigation of Solidification Microstructure in Resistance Spot Welding of Haynes 230 Superalloy [Volume 9, Issue 1, 2025]
Kolahdooz, Amin Parametric Investigation of Cooling Slope Casting Method on the Microstructure and Hardness Values of Al-A380 Alloy [Volume 2, Issue 2, 2018, Pages 109-121]
Kolahdooz, Amin Statistical Approach on Microstructure and Hardness of Semi-Solid Cast Aluminum Alloy A380 Produced by Mechanical Vibration in
Argon Gas Atmosphere [Volume 2, Issue 4, 2019, Pages 275-286]
Korojy, Bahman Effect of As Cast Microstructure on Recrystallization and Recovery Processes of 2304 Duplex Stainless Steel [Volume 2, Issue 3, 2018, Pages 201-209]
Korojy, Bahman Effect of Stirring Temperature on the Morphology of Primary Si Particles, Hardness and Wear Behavior of Al-20wt.%Si Alloy Prepared by Semi-Solid Stir Casting [Volume 3, Issue 3, 2019, Pages 151-162]
Korojy, Bahman Investigation of Mechanical Properties and in vitro Corrosion Rate of Open-Cell Cast Magnesium Foams [Volume 4, Issue 3, 2020, Pages 155-165]
Korojy, Bahman Investigating the Effect of Superheat Temperature and Modification on the Columnar to Equiaxed Transition of Al-Si Eutectic Alloy [Volume 8, Issue 1, 2024, Pages 5-15]
Korojy, Bahman Investigating the Interface Characteristics of Al- A356/ Al15Sn4Si1Mg Bimetal Produced by Centrifugal Casting Method [Volume 9, Issue 2, 2025]
Kouhi, Saeed Effect of Crucible Type on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 6, Issue 1, 2022, Pages 3-8]
Kouhi Faeigh Dehkordi, Saeed Effect of Melt Holding Time on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 3, Issue 1, 2019, Pages 29-36]
L
Limooei, Mohammad Bagher Formation of Zinc-Aluminum Flake Coating on Cast Iron Disc and Consideration of Corrosion Behavior [Volume 4, Issue 1, 2020, Pages 21-29]
Limooei, Mohammad Bagher Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
Limooei, Mohammad Bagher Effect of Stabilized Zirconia Oxide by Y2O3 and Silicon Carbide on Physical Stability of Magnesite Based Refractories [Volume 6, Issue 1, 2022, Pages 45-51]
M
Mahdifar, Mohsen The Effect of Pouring Temperature on Graphitization of Cast Bars Produced by in-Mold Lost Foam Process [Volume 1, Issue 1, 2017, Pages 23-35]
Malekan, Mahdi An Investigation on the Effect of Grain Refinement on the Fluidity and Hot Tearing Susceptibility of Ce-Modified 2024 Al Alloy [Volume 6, Issue 3, 2022, Pages 195-202]
Malekan, Mehdi A review on the investment casting process in the arts and jewelry industries [Volume 5, Issue 2, 2021, Pages 139-159]
Malekoutikhah, Mohammad Effect of Melt Shearing Time by Vertical Spiral Stirrer on Hot Tearing Behavior of A206 Alloy [Volume 6, Issue 1, 2022, Pages 23-34]
Manafi, Sahebali Effect of Stabilized Zirconia Oxide by Y2O3 and Silicon Carbide on Physical Stability of Magnesite Based Refractories [Volume 6, Issue 1, 2022, Pages 45-51]
Mansouri, Elahe A Review of Deformation Mechanisms and Microstructure Engineering in Solid Solutions Based on CoCrNi [Volume 8, Issue 1, 2024, Pages 51-76]
Mansouri, Yavar The Evaluation of Thermomechanical and Heat Treatment Parameters on the Microstructure and Tensile Properties of Ti-6Al-2Sn-4Zr-2Mo-0.08Si Alloy [Volume 7, Issue 1, 2023, Pages 45-55]
Mehditabar, Aref Evaluation of Microstructure, Physical and Mechanical Properties of Functionally Graded Al-Cu Fabricated by Horizontal Centrifugal Casting [Volume 1, Issue 1, 2017, Pages 47-58]
Mehmannavaz, Hossein Prediction of Shrinkage Porosity and its Remedy by Numerical Simulation in
a Conical Carbon Steel Casting [Volume 4, Issue 1, 2020, Pages 39-50]
Meysami, Amirhossein Numerical Simulation of Fluid Flow and Lubricant Powder Behavior in Steel Continuous Casting Mold for Improving of Produced Ingot Properties [Volume 2, Issue 3, 2018, Pages 181-192]
Mirbagheri, Seyed Mohammad Hossein Investigation of Heat Transfer Coefficients Effects in Directional Solidification of GTD111 Super-alloy [Volume 3, Issue 1, 2019, Pages 11-20]
Mirbagheri, Seyed Mohammad Hossein To Produce an Advanced Zamak5 Composite with a 3D-Open Cell Copper Foam by Casting Method [Volume 4, Issue 3, 2020, Pages 129-136]
Mirbagheri, Seyed Mohammad Hossein Investigation of the effect of misorientation grain growth on the creep behavior of nickel-based GTD111DS superalloy [Volume 5, Issue 2, 2021, Pages 79-92]
Mirbagheri, Seyed Mohammad Hossein Microstructure Characterization and Creep Behavior on the Casting CMM88Y Super Alloy turbine Blade [Volume 6, Issue 2, 2022, Pages 113-124]
Mirbagheri, Seyed Mohammad Hossein Production and Characterization of Properties of Al Matrix Composite Reinforced with integrated ordered Cu Lattice Structure [Volume 7, Issue 1, 2023, Pages 57-68]
Mirdamadi, Shamsedin Effect of Minor Amount of Scandium on the Microstructure of 7000 Series Aluminium in as Cast, Homogenized and Artificial Age Hardened Conditions [Volume 2, Issue 4, 2019, Pages 211-226]
Mirzadeh, Hamed Calculating the Elemental Diffusivities During Homogenization of as-cast Inconel 718 Superalloy [Volume 3, Issue 3, 2019, Pages 123-129]
Moazami-Goudarzi, Mohammad Effect of Sample Diameter and Withdrawal Rate on Microstructure and Hot Tensile Behavior of Directionally Solidified PWA 1483 Superalloy [Volume 3, Issue 3, 2019, Pages 175-185]
Moghimi Dehkordi, Mehdi Experimental Investigation of Effective Parameters on Gas Exhaust from the Mold in Lost Foam Casting Method [Volume 1, Issue 3, 2018, Pages 161-170]
Mohajeri, Mahdiye Non-linear Standard Model for Optimization of Charge Materials in Crucible and Induction Melting Furnaces [Volume 5, Issue 2, 2021, Pages 107-118]
Mohamammadyari, Saeid Production and Characterization of SAC-xAl Lead Free Nanocomposite Solder via Melt-Spinning Technique [Volume 1, Issue 3, 2018, Pages 171-180]
Mohammadaliha, Mehdi The Effect of CeO2 and Hf Additives as a Grain Refinement on the Microstructure and Hardness of Austenitic Manganese Steel [Volume 5, Issue 3, 2021, Pages 165-174]
Mohammadi, Hossein An Investigation on the Effect of Grain Refinement on the Fluidity and Hot Tearing Susceptibility of Ce-Modified 2024 Al Alloy [Volume 6, Issue 3, 2022, Pages 195-202]
Mohammadi, Morteza Effect of Modifier Elements on Quality Index Improvement of A356 Aluminum Alloy Before and After T6 Heat Treatment [Volume 2, Issue 1, 2018, Pages 11-25]
Mohseni Zonoozi, Elnaz Effects of Chemical Composition and Heat Treatment Conditions on the Magnetic Properties and Microstructure of Cast Fe–Cr–Co Magnets [Volume 4, Issue 1, 2020, Pages 11-20]
Momeni, Amir Evaluation of the Effect of Heat Treatment on Structural Changes and Mechanical Properties of Ti-48Al-2Cr-2Nb Intermetallic [Volume 6, Issue 2, 2022, Pages 125-132]
Momeni, Amir Effects of Cooling Rate after Homogenizing on the Microstructure and Tensile Properties of a New Generation Cobalt Base Superalloy [Volume 8, Issue 2, 2024, Pages 81-88]
Momeni, Amir Investigation and Detrmining the Temperature of the α2 to α Transformation During Hot Deformation of Ti-48Al-2Cr-2Nb Intermetallic [Volume 9, Issue 2, 2025]
Morakabati, Maryam Evolution of Aging Treatment Effect on the Microstructure and Hardness of a Co-Al-W-Ti-Ta Based Superalloy [Volume 4, Issue 2, 2020, Pages 89-98]
Morakabati, Maryam Effect of Aging on the High Temperature Mechanical Properties of a Novel Co-7Al-7W-4Ti-2Ta Superalloy [Volume 4, Issue 4, 2021, Pages 193-201]
Morakabati, Maryam Evaluation of the Effect of Carbon and Solution Treatment on the Microstructure and Mechanical Properties of ASTM F75 Cast Co Based Alloy [Volume 6, Issue 1, 2022, Pages 35-44]
Morakabati, Maryam Evaluation of the Effect of Heat Treatment on Structural Changes and Mechanical Properties of Ti-48Al-2Cr-2Nb Intermetallic [Volume 6, Issue 2, 2022, Pages 125-132]
Morakabati, Maryam The Evaluation of Thermomechanical and Heat Treatment Parameters on the Microstructure and Tensile Properties of Ti-6Al-2Sn-4Zr-2Mo-0.08Si Alloy [Volume 7, Issue 1, 2023, Pages 45-55]
Morakabati, Maryam The Evaluation of Addition of Boron and Zirconium on the Hot Workability of IN 718 Plus Superalloy [Volume 8, Issue 1, 2024, Pages 27-38]
Morakabati, Maryam Effects of Cooling Rate after Homogenizing on the Microstructure and Tensile Properties of a New Generation Cobalt Base Superalloy [Volume 8, Issue 2, 2024, Pages 81-88]
Morakabati, Maryam Evaluation of the Hot Workability Behavior of AISI 303Se Stainless Steel in Cast and Wrought Conditions Using Tensile Test [(Articles in Press)]
Morakabati, Maryam Effect of cold work on the microstructure and mechanical properties of ambient temperature Nimonic 263 superalloy [Volume 9, Issue 1, 2025]
Morakabati, Maryam Investigation and Detrmining the Temperature of the α2 to α Transformation During Hot Deformation of Ti-48Al-2Cr-2Nb Intermetallic [Volume 9, Issue 2, 2025]
Morakabati, Maryam Determination of the Beta Transus Temperature of Near-Alpha Titanium Alloy Ti-8Al-1Mo-1V through Microstructural Examination [(Articles in Press)]
Mostafavi, Mohammad Effect of Si on Castability of Al-Cu-Si Alloys [Volume 4, Issue 4, 2021, Pages 215-226]
N
Nahavandi, Haniyeh Investigating the Microstructure, Mechanical and Thermal Properties of CuNiAlCrFe High Entropy Alloy Made by VAR Method [Volume 8, Issue 2, 2024, Pages 107-115]
Nahavandi, Haniyeh A Review of Casting Processes for High Entropy Alloys [Volume 7, Issue 2, 2023]
Najarian, Ali Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
Najmi, Mohammad Microstructure Characterization and Creep Behavior on the Casting CMM88Y Super Alloy turbine Blade [Volume 6, Issue 2, 2022, Pages 113-124]
Nakhodachi, Soheil Investigation of the effect of misorientation grain growth on the creep behavior of nickel-based GTD111DS superalloy [Volume 5, Issue 2, 2021, Pages 79-92]
Naseri Azari, Golnaz An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
Naseri Azari, Golnaz Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
Naser-Zoshki, Hamed Design of Refractory High-Entropy Alloys to Reduce Weight and Cost [Volume 4, Issue 3, 2020, Pages 167-173]
Nasresfahani, Mohamad Reza Effect of Melt Shearing Time by Vertical Spiral Stirrer on Hot Tearing Behavior of A206 Alloy [Volume 6, Issue 1, 2022, Pages 23-34]
Nasri, Mehdi Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
Nategh, Saeid Effect of Minor Amount of Scandium on the Microstructure of 7000 Series Aluminium in as Cast, Homogenized and Artificial Age Hardened Conditions [Volume 2, Issue 4, 2019, Pages 211-226]
Navaei, Soheil Comparison of Wear Behavior of Ductile Iron in Austempered and Quenched-Tempered Conditions [Volume 3, Issue 3, 2019, Pages 141-150]
Nazari, Maryam Effect of Modifier Elements on Quality Index Improvement of A356 Aluminum Alloy Before and After T6 Heat Treatment [Volume 2, Issue 1, 2018, Pages 11-25]
Nikukar, Hamed Optimization of Magnesium Solubility Factor in Production of Ductile Iron using Gating System Addition Method [Volume 3, Issue 1, 2019, Pages 37-43]
Nobari, Hamed Effect of Controlled Diffusion Solidification (CDS) on Increasing the Homogenization Kinetics of AA7068 Aluminum Alloy [Volume 8, Issue 1, 2024, Pages 39-50]
Noormohammadi Omran, Hesam The Effect of Metallurgical Parameters on Casting Defects of Ductile Iron by Taguchi Method [Volume 9, Issue 2, 2025]
Nordin, Nur Azma Simultaneous Effect of Melt Superheating and Holding Time on Structural Changes, Solidification Characteristics, and Hardness of Al-20Mg2Si-2Cu Composite [Volume 5, Issue 2, 2021, Pages 93-106]
Nordin, Nur Azma The Role of Barium in Structural Changes, Mechanical Properties, and Wear Behavior of Al-20Mg2Si Composite [Volume 6, Issue 1, 2022, Pages 9-21]
Norouzi, Fahime Effects of Squeeze Casting Parameters on the Microstructure Characteristics of ZAMAK5 Reinforced with Alumina Preform Composite [Volume 6, Issue 3, 2022, Pages 203-212]
Nourbaksh, Sayyed Hasan The influence of Solid Fraction on the Microstructural Evolution and Mechanical Properties of in situ Mg/Mg2Si Composite Produced by Semi-Solid Casting Process [Volume 6, Issue 3, 2022, Pages 171-182]
Nouri, Hadi Effect of cold work on the microstructure and mechanical properties of ambient temperature Nimonic 263 superalloy [Volume 9, Issue 1, 2025]
Nourouzi, Salman Effect of Pouring Temperature and Partial Remelting on Microstructure and Wear Properties of A390 Alloy in Slope Cooling Casting [Volume 1, Issue 1, 2017, Pages 37-46]
Nourouzi, Salman The Effect of Pouring Temperature, Mechanical Vibration and Partial Remelting on Microstructure and Mechanical Properties of Al-A390 Alloy [Volume 2, Issue 1, 2018, Pages 39-53]
O
Omrani, Hamid Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
Omranian Mohammadi, Peiman Formation of Zinc-Aluminum Flake Coating on Cast Iron Disc and Consideration of Corrosion Behavior [Volume 4, Issue 1, 2020, Pages 21-29]
Omranian Mohammadi, Peiman Effect of Inoculant Containing Si and Ba on Microstructure and Mechanical Properties of Ferritic Ductile Iron Castings [Volume 5, Issue 3, 2021, Pages 215-222]
Omranian Mohammadi, Peiman The Effect of Metallurgical Parameters on Casting Defects of Ductile Iron by Taguchi Method [Volume 9, Issue 2, 2025]
P
Paridari, Shima Effect of Calcium on Oxidation Resistance and Fluidity of Magnesium Alloy AZ91 [Volume 2, Issue 3, 2018, Pages 193-200]
Peyravi, Aَli Effect of Directional Solidification Conditions on the Structure and Rollability of 2024 Aluminum Alloy [Volume 5, Issue 1, 2021, Pages 9-18]
Pirnajmedin, Najme Effect of Sb addition and casting modulus on graphite morphology, microstructure and mechanical properties of ductile cast iron [Volume 5, Issue 2, 2021, Pages 67-77]
Pourgharibshahi, Mohammad Effect of the Ablation Casting Binder Type on Improving the Tensile Strength of A356 Aluminum Alloy [Volume 5, Issue 3, 2021, Pages 175-183]
Pourgharibshahi, Mohammad Effect of Controlled Diffusion Solidification (CDS) on Increasing the Homogenization Kinetics of AA7068 Aluminum Alloy [Volume 8, Issue 1, 2024, Pages 39-50]
Pourghorban, Amin The Effect of Inert Gas Injection Semisolid Process on the Structure and Hot Tearing Susceptibility of Al-4.3%Cu Alloy [Volume 3, Issue 1, 2019, Pages 1-10]
Pourmorad Kaleybar, Sepehr Investigating the Microstructure and Phase Analysis of High Entropy alloy CoCuFeMnNi Made by Vacuum Induction Furnace [Volume 8, Issue 2, 2024, Pages 117-124]
R
Raaisi, Pouria Numerical and Experimental Investigation of Solidification Microstructure in Resistance Spot Welding of Haynes 230 Superalloy [Volume 9, Issue 1, 2025]
Rabiee, Sayed Mahmood The Effect of Pouring Temperature, Mechanical Vibration and Partial Remelting on Microstructure and Mechanical Properties of Al-A390 Alloy [Volume 2, Issue 1, 2018, Pages 39-53]
Raei Dehaghi, Mohammad Effect of Melt Shearing Time by Vertical Spiral Stirrer on Hot Tearing Behavior of A206 Alloy [Volume 6, Issue 1, 2022, Pages 23-34]
Raeissi, Mehdi The influence of Solid Fraction on the Microstructural Evolution and Mechanical Properties of in situ Mg/Mg2Si Composite Produced by Semi-Solid Casting Process [Volume 6, Issue 3, 2022, Pages 171-182]
Rahimi, Abolfazl Developing Ag-9Pd (Silvadium) Casting Alloys with High-Luminosity Lifespan for Traditional Jewelry [Volume 4, Issue 2, 2020, Pages 111-118]
Rahimi, Gholam Hossien Evaluation of Microstructure, Physical and Mechanical Properties of Functionally Graded Al-Cu Fabricated by Horizontal Centrifugal Casting [Volume 1, Issue 1, 2017, Pages 47-58]
Rahimpour Besra, Rahim Effect of Inoculation and Casting Modulus on the as Cast Microstructure of Austenitic Manganese Iron with Nodular Graphite [Volume 5, Issue 1, 2021, Pages 19-30]
Raiszadeh, Ramin Effect of Controlled Diffusion Solidification (CDS) on Increasing the Homogenization Kinetics of AA7068 Aluminum Alloy [Volume 8, Issue 1, 2024, Pages 39-50]
Raki, Nader Parametric Investigation of Cooling Slope Casting Method on the Microstructure and Hardness Values of Al-A380 Alloy [Volume 2, Issue 2, 2018, Pages 109-121]
Ramezani, Nabiollah Energy Management in Steelmaking by Electric Arc Furnace Based on OLTC [Volume 4, Issue 1, 2020, Pages 51-67]
Ranjbarpour, Hadiseh Effect of Pouring Temperature and Partial Remelting on Microstructure and Wear Properties of A390 Alloy in Slope Cooling Casting [Volume 1, Issue 1, 2017, Pages 37-46]
Razaghian Arani, Ahmad Effect of Severe Plastic Deformation on Mechanical Properties and Microstructure of A520 Al-Alloy Produced by Semisolid and Ordinary Casting [Volume 1, Issue 1, 2017, Pages 9-21]
Razavi, Seyed Hosein Effect of Solution Treatment on the Microstructure of γ' Precipitates in the IN738LC Superalloy Before and After Aging [Volume 1, Issue 2, 2017, Pages 99-108]
Razavi, Seyed Hosein Effect of Solution Heat Treatment Media on Microstructure and Hardness of Ni-Base Superalloy IN738LC [Volume 2, Issue 3, 2018, Pages 161-179]
Razavi, Seyed Hosein The Effect of Cooling Rate and Cryogenic Treatment on Microstructure and Hardness of IN738LC Cast Superalloy after Full Solution Annealing [Volume 3, Issue 1, 2019, Pages 45-52]
Razavi, Seyed Hosein The Effect of Cryogenic Treatment on the Rejuvenation of Exposed IN738LC Gas Turbine Blade [Volume 3, Issue 3, 2019, Pages 163-174]
Razavi, Seyed Hosein Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
Rezaei, Hossein Evaluation of the Effect of Heat Treatment on Structural Changes and Mechanical Properties of Ti-48Al-2Cr-2Nb Intermetallic [Volume 6, Issue 2, 2022, Pages 125-132]
Rezaei, Hossein Effects of Cooling Rate after Homogenizing on the Microstructure and Tensile Properties of a New Generation Cobalt Base Superalloy [Volume 8, Issue 2, 2024, Pages 81-88]
Rezaei, Hossein Investigation and Detrmining the Temperature of the α2 to α Transformation During Hot Deformation of Ti-48Al-2Cr-2Nb Intermetallic [Volume 9, Issue 2, 2025]
Rezaeian, S. Mohammad Energy Management in Steelmaking by Electric Arc Furnace Based on OLTC [Volume 4, Issue 1, 2020, Pages 51-67]
Rezaie, Amir Correlation of Microstructure, Hardness and Wear Resistance of Aluminum 3000 Series with Li Additive Fabricated by Horizontal Centrifugal Casting Method [Volume 2, Issue 4, 2019, Pages 239-249]
S
Saadati, Ahmad A review on the investment casting process in the arts and jewelry industries [Volume 5, Issue 2, 2021, Pages 139-159]
Saboori, Abdollah The Effect of Surface Severe Plastic Deformation on Microstructure and Mechanical Properties of Pure Titanium Produced by Selective Laser Melting [Volume 7, Issue 1, 2023, Pages 15-24]
Sadeghi Mohammadi, Mohsen Determination of Critical Pressure and Impeding Pressure for Manganese Evaporation During the Induction Melting Process of Manganese-Nickel Alloys [Volume 3, Issue 2, 2019, Pages 67-74]
Sadrossadat Zadeh, Seyed Mohsen Effect of Slope Casting Parameters on the Microstructure and Mechanical Properties of AXE622 Alloy [Volume 6, Issue 2, 2022, Pages 103-112]
Safaei, Mir Saeed Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
Safaei, Mir Saeed Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
Saffari, Elaheh An Investigation on the Effect of Chill Modification on Microstructure and Quality Index of Al-15Mg2Si Composite [Volume 4, Issue 2, 2020, Pages 79-87]
Saghafian, Hasan Investigation of Wear Behavior of A356/SiCnp Nanocomposite in As-cast and Heat-Treated Conditions [Volume 8, Issue 1, 2024, Pages 17-26]
Saghafian Larijani, Hassan Evaluation of the Microstructure and Wear Properties of A356/Al2O3 Nanocomposite Produced by Stir Casting Method [Volume 1, Issue 1, 2017, Pages 59-68]
Saghafian Larijani, Hassan Effect of Immersion Time and Temperature on the Interface Characteristics of Pure Aluminium and Plain Carbon Steel [Volume 2, Issue 1, 2018, Pages 55-69]
Saghafian Larijani, Hassan Effect of Calcium on Oxidation Resistance and Fluidity of Magnesium Alloy AZ91 [Volume 2, Issue 3, 2018, Pages 193-200]
Saghafian Larijani, Hassan Comparison of Wear Behavior of Ductile Iron in Austempered and Quenched-Tempered Conditions [Volume 3, Issue 3, 2019, Pages 141-150]
Saghafian Larijani, Hassan Investigating the Effect of Rapid Heating on Microstructure and Tensile Properties of Phosphorus Modified Alloy Al-Si-Cu-Mg [Volume 4, Issue 2, 2020, Pages 71-78]
Saghafian Larijani, Hassan Investigating the Mechanical Properties and Possibility of Replacing Forged Parts with Cast Parts of 6061 Aluminum Alloy [Volume 8, Issue 2, 2024, Pages 99-106]
Saghafi Yazdi, Morteza Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite [Volume 6, Issue 1, 2022, Pages 53-65]
Saghafi Yazdi, Morteza Investigation of Effect of Mold Mechanical Vibration During Solidification on the Structure and Corrosion Resistance of Zn-4Si Alloy [Volume 6, Issue 2, 2022, Pages 157-167]
Saghafi Yazdi, Morteza Thermal Simulation of Laser Cladding Process of High Entropy Alloy TiNiCrMoW-ZrB2 Coating on IN738 Superalloy [Volume 9, Issue 2, 2025]
Sajjadi, Seyed Meysam The Effect of CeO2 and Hf Additives as a Grain Refinement on the Microstructure and Hardness of Austenitic Manganese Steel [Volume 5, Issue 3, 2021, Pages 165-174]
Salehi, Ali Microstructure Characterization and Creep Behavior on the Casting CMM88Y Super Alloy turbine Blade [Volume 6, Issue 2, 2022, Pages 113-124]
Salehi, Maryam Microstructure and mechanical properties of Al 5083 alloy produced by rapid solidification [Volume 5, Issue 1, 2021, Pages 1-8]
Salehi, Maryam Investigation of Wear Behavior of A356/SiCnp Nanocomposite in As-cast and Heat-Treated Conditions [Volume 8, Issue 1, 2024, Pages 17-26]
Salimi, Ali Evaluation of the Hot Workability Behavior of AISI 303Se Stainless Steel in Cast and Wrought Conditions Using Tensile Test [(Articles in Press)]
Samadi, Ahad The Effect of Silicon Content on the Graded Microstructure of Centrifugally Cast Al-Si Alloys [Volume 1, Issue 2, 2017, Pages 89-97]
Samadi, Ahad Establishment of Graded Hybrid Microstructure Through Centrifugal Casting of a Hypereutectic Al-Mg2Si Alloy [Volume 2, Issue 2, 2018, Pages 79-88]
Samadi, Ahad Effect of Magnesium Content on Functionally Graded Microstructure and Hardness of Centrifugally cast Al-20Si-XMg Composites [Volume 3, Issue 2, 2019, Pages 55-66]
Samiee, Mohsen The Effect of Cooling Rate and Cryogenic Treatment on Microstructure and Hardness of IN738LC Cast Superalloy after Full Solution Annealing [Volume 3, Issue 1, 2019, Pages 45-52]
Samiee, Mohsen The Effect of Cryogenic Treatment on the Rejuvenation of Exposed IN738LC Gas Turbine Blade [Volume 3, Issue 3, 2019, Pages 163-174]
Sanjari, Alireza Effect of Sample Diameter and Withdrawal Rate on Microstructure and Hot Tensile Behavior of Directionally Solidified PWA 1483 Superalloy [Volume 3, Issue 3, 2019, Pages 175-185]
Sardari, Alireza Study of ancient metallurgy on metal artifacts belonging to the Elamite sites of Sanjar hill in Khuzestan and Qalagap hill in Lurestan [Volume 9, Issue 1, 2025]
Seifollahi, Masoumeh Evaluation of the Effect of Carbon and Solution Treatment on the Microstructure and Mechanical Properties of ASTM F75 Cast Co Based Alloy [Volume 6, Issue 1, 2022, Pages 35-44]
Seifollahi, Masumeh Effect of Melt Holding Time on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 3, Issue 1, 2019, Pages 29-36]
Seifollahi, Masumeh Effect of Carbon Content on the Microstructure and Mechanical Properties of Hyness 25 Superalloy [Volume 4, Issue 3, 2020, Pages 137-143]
Seifollahi, Masumeh Effect of Crucible Type on γ' Precipitates and Stress Rupture Properties of Rene 80 Superalloy [Volume 6, Issue 1, 2022, Pages 3-8]
Seifollahi, Masumeh The Effect of Melt Holding Time and Vacuum Pressure on the High Temperature Fatigue Life of Ni Based Hastelloy X Superalloy [Volume 5, Issue 3, 2021, Pages 205-213]
Seifollahi, Masumeh Effect of Solutionizing Heat Treatment Duration on the Microstructural Defects of CMSX-4 Single Crystal [Volume 6, Issue 2, 2022, Pages 143-155]
Seifollahi, Masumeh Effect of Withdrawal Rate of Directional Solidification on the Microstructure of a New Cobalt-Nickel Based Superalloy [Volume 7, Issue 1, 2023, Pages 5-14]
Seifollahi, Masumeh Effects of Cooling Rate after Homogenizing on the Microstructure and Tensile Properties of a New Generation Cobalt Base Superalloy [Volume 8, Issue 2, 2024, Pages 89-97]
Seyedraoufi, Zahra Sadat Effect of Solution Treatment on the Microstructure of γ' Precipitates in the IN738LC Superalloy Before and After Aging [Volume 1, Issue 2, 2017, Pages 99-108]
Seyedraoufi, Zahra Sadat The Effect of Cooling Rate and Cryogenic Treatment on Microstructure and Hardness of IN738LC Cast Superalloy after Full Solution Annealing [Volume 3, Issue 1, 2019, Pages 45-52]
Seyedraoufi, Zahra Sadat The Effect of Cryogenic Treatment on the Rejuvenation of Exposed IN738LC Gas Turbine Blade [Volume 3, Issue 3, 2019, Pages 163-174]
Seyedraoufi, Zahra Sadat Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
Seyedraoufi, Zahra Sadat The Effects of Cooling Rate after Solutionizing on the Microstructural Evaluation of Cast IN718 Superalloy during Long-Term Thermal Exposure [Volume 4, Issue 3, 2020, Pages 175-184]
Seyedraoufi, Zahra Sadat Investigation of AISI 321/Al Interface in Compound Casting at 840 °C [Volume 7, Issue 1, 2023, Pages 35-44]
Seyedraoufi, Zahra-Sadat Effect of Solution Heat Treatment Media on Microstructure and Hardness of Ni-Base Superalloy IN738LC [Volume 2, Issue 3, 2018, Pages 161-179]
Shabestari, Saeed Investigation on the Effect of Solidification Parameters on Microstructural Characteristics and Hardness of Al-Fe Alloy Produced by Directional Solidification in Bridgeman Furnace [Volume 1, Issue 1, 2017, Pages 1-8]
Shabestari, Saeed Effect of Semi-Solid Rotating Container Process on Characteristics of Solidification, Dendrite Coherency and Microstructure of AZ91 Magnesium Alloy [Volume 2, Issue 3, 2018, Pages 135-146]
Shabestari, Saeed The Effect of Inert Gas Injection Semisolid Process on the Structure and Hot Tearing Susceptibility of Al-4.3%Cu Alloy [Volume 3, Issue 1, 2019, Pages 1-10]
Shabestari, Saeed Investigation on Effects of Melt Temperature on Solidification Behavior of in-situ Al-Mg2Si Composite using Cooling Curve Thermal Analysis [Volume 4, Issue 1, 2020, Pages 1-9]
Shadi, Milad Investigating the Mechanical Properties and Possibility of Replacing Forged Parts with Cast Parts of 6061 Aluminum Alloy [Volume 8, Issue 2, 2024, Pages 99-106]
Shaeri, Mohammad Hossein Effect of Severe Plastic Deformation on Mechanical Properties and Microstructure of A520 Al-Alloy Produced by Semisolid and Ordinary Casting [Volume 1, Issue 1, 2017, Pages 9-21]
Shafie Farhoud, Amir Hassan An Investigation on Reduction of Insoluble Build-ups in the Inductor of Ductile Iron Pouring Machine [Volume 2, Issue 2, 2018, Pages 101-108]
Shahi Anhar, Mohammadreza Investigation of Wear Behavior of A356/SiCnp Nanocomposite in As-cast and Heat-Treated Conditions [Volume 8, Issue 1, 2024, Pages 17-26]
Shahmiri, Mohammad Investigation of Oxide Film Characteristics in Al-Zn Melt by Oxide-Metal-Oxide Technique [Volume 3, Issue 3, 2019, Pages 131-140]
Shahrokhian Dehkordi, Mohammad Amin Experimental Investigation of Effective Parameters on Gas Exhaust from the Mold in Lost Foam Casting Method [Volume 1, Issue 3, 2018, Pages 161-170]
Shajari, Yazdan Effect of Solution Treatment on the Microstructure of γ' Precipitates in the IN738LC Superalloy Before and After Aging [Volume 1, Issue 2, 2017, Pages 99-108]
Shajari, Yazdan Effect of Solution Heat Treatment Media on Microstructure and Hardness of Ni-Base Superalloy IN738LC [Volume 2, Issue 3, 2018, Pages 161-179]
Shajari, Yazdan The Effect of Cryogenic Treatment on the Rejuvenation of Exposed IN738LC Gas Turbine Blade [Volume 3, Issue 3, 2019, Pages 163-174]
Shajari, Yazdan Effect of Remelting and Standard Heat Treatment on Microstructure and Mechanical Properties of IN738LC Superalloy [Volume 4, Issue 2, 2020, Pages 99-109]
Shakeri, Bahram Investigation of Microstructure and Hardness of upper Bainitic Austempered Aluminum Ductile Iron (Fe-3.4C-4.3Al-Mg) [Volume 3, Issue 2, 2019, Pages 75-90]
Shamsian Jeze, Mahya Effect of Solution Cooling Rate on Microstructure and Hardness of X-750 Superalloy [Volume 4, Issue 3, 2020, Pages 145-153]
Sharifi, Ali Comparison of Wear Behavior of Ductile Iron in Austempered and Quenched-Tempered Conditions [Volume 3, Issue 3, 2019, Pages 141-150]
Sharifi, Hassan Experimental Investigation of Effective Parameters on Gas Exhaust from the Mold in Lost Foam Casting Method [Volume 1, Issue 3, 2018, Pages 161-170]
Sohrabi, Mohammad Javad Calculating the Elemental Diffusivities During Homogenization of as-cast Inconel 718 Superalloy [Volume 3, Issue 3, 2019, Pages 123-129]
Soltanieh, Mansour Investigating of Wettability Modification Methods on Microstructure and Mechanical Properties of Silicon Carbide/ Aluminum Composite Produced by Stir Casting [Volume 3, Issue 1, 2019, Pages 21-28]
T
Tabatabaei Rezaei, Nima Investigating the Effect of Rapid Heating on Microstructure and Tensile Properties of Phosphorus Modified Alloy Al-Si-Cu-Mg [Volume 4, Issue 2, 2020, Pages 71-78]
Taghiabadi, Reza An Investigation on the Effect of Mn on the Castability of Hypoeutectic Al-2Ni-xMn Alloys [Volume 1, Issue 2, 2017, Pages 69-78]
Taghiabadi, Reza Effect of Modifier Elements on Quality Index Improvement of A356 Aluminum Alloy Before and After T6 Heat Treatment [Volume 2, Issue 1, 2018, Pages 11-25]
Taghiabadi, Reza Investigation of the Effect of Copper on Microstructural Modification and Quality Index of Al-15Mg2Si Composite [Volume 3, Issue 4, 2020, Pages 217-227]
Taghiabadi, Reza An Investigation on the Effect of Chill Modification on Microstructure and Quality Index of Al-15Mg2Si Composite [Volume 4, Issue 2, 2020, Pages 79-87]
Taghiabadi, Reza Effect of Si on Castability of Al-Cu-Si Alloys [Volume 4, Issue 4, 2021, Pages 215-226]
Taghiabadi, Reza Investigation of microstructure and mechanical properties of Al-2Ni-xMn alloys as substitute for hypoeutectic Al-4Ni alloy [Volume 5, Issue 1, 2021, Pages 51-62]
Taghiabadi, Reza Investigation of Effect of Mechanical Vibration During Solidification on Microstructure and Wear Properties of Zn-4Si Composite [Volume 6, Issue 1, 2022, Pages 53-65]
Taghiabadi, Reza Investigation of Effect of Mold Mechanical Vibration During Solidification on the Structure and Corrosion Resistance of Zn-4Si Alloy [Volume 6, Issue 2, 2022, Pages 157-167]
Taghiabadi, Reza An Investigation on the Effect of Grain Refinement on the Fluidity and Hot Tearing Susceptibility of Ce-Modified 2024 Al Alloy [Volume 6, Issue 3, 2022, Pages 195-202]
Taghiabadi, Reza The Effect of Surface Severe Plastic Deformation on Microstructure and Mechanical Properties of Pure Titanium Produced by Selective Laser Melting [Volume 7, Issue 1, 2023, Pages 15-24]
Taghiabadi, Reza Thermal Simulation of Laser Cladding Process of High Entropy Alloy TiNiCrMoW-ZrB2 Coating on IN738 Superalloy [Volume 9, Issue 2, 2025]
Taheri, Morteza Thermal Simulation of Laser Cladding Process of High Entropy Alloy TiNiCrMoW-ZrB2 Coating on IN738 Superalloy [Volume 9, Issue 2, 2025]
Taheri, Nader Investigation of Oxide Film Characteristics in Al-Zn Melt by Oxide-Metal-Oxide Technique [Volume 3, Issue 3, 2019, Pages 131-140]
Taherimanesh, Faeze Effect of Stirring Temperature on the Morphology of Primary Si Particles, Hardness and Wear Behavior of Al-20wt.%Si Alloy Prepared by Semi-Solid Stir Casting [Volume 3, Issue 3, 2019, Pages 151-162]
Tavakoli, Rouhollah Production and Characterization of SAC-xAl Lead Free Nanocomposite Solder via Melt-Spinning Technique [Volume 1, Issue 3, 2018, Pages 171-180]
Tavakoli, Rouhollah Numerical simulation of solidification microstructure in selective laser melting additive manufacturing and studying the effect of process parameters on grains morphologies [Volume 3, Issue 4, 2020, Pages 229-236]
Tavakoli, Rouhollah Optimum design of sprue well using computer simulation and experimental study [Volume 4, Issue 2, 2020, Pages 119-126]
Torabi, Mehran Effect of Inoculation and Casting Modulus on the as Cast Microstructure of Austenitic Manganese Iron with Nodular Graphite [Volume 5, Issue 1, 2021, Pages 19-30]
Torabi, Seyyed amin Effect of Shot-Peening on the Wear Behavior of Two Types of High Manganese Austenitic Steel [Volume 1, Issue 2, 2017, Pages 121-132]
Torfeh, Maryam Investigation of Heat Transfer Coefficients Effects in Directional Solidification of GTD111 Super-alloy [Volume 3, Issue 1, 2019, Pages 11-20]
Torfeh, Maryam Investigation of the effect of misorientation grain growth on the creep behavior of nickel-based GTD111DS superalloy [Volume 5, Issue 2, 2021, Pages 79-92]
Torkamani, Shahin Evaluation of the Effect of Carbon and Solution Treatment on the Microstructure and Mechanical Properties of ASTM F75 Cast Co Based Alloy [Volume 6, Issue 1, 2022, Pages 35-44]
Tutunchi, Abolfazl Comparison of Ti and Nb Microalloy Addition on the Microstructure and Mechanical Properties of a Quenched-Partitioned Cast Steel [Volume 5, Issue 1, 2021, Pages 31-40]
V
Vahdat, Seyed Ebrahim Evaluation of Microstructure, Physical and Mechanical Properties of Functionally Graded Al-Cu Fabricated by Horizontal Centrifugal Casting [Volume 1, Issue 1, 2017, Pages 47-58]
Vahdat, Seyed Ebrahim Properties of SAE660 Bronze Bearing at Four Different Casting Conditions [Volume 2, Issue 2, 2018, Pages 89-100]
Vahdat, Seyed Ebrahim Correlation of Microstructure, Hardness and Wear Resistance of Aluminum 3000 Series with Li Additive Fabricated by Horizontal Centrifugal Casting Method [Volume 2, Issue 4, 2019, Pages 239-249]
Vahdati-Khaki, Jalil Design of Refractory High-Entropy Alloys to Reduce Weight and Cost [Volume 4, Issue 3, 2020, Pages 167-173]
Varahram, Nasser The Effect of Precipitation Hardening on Microstructural Characteristics of Directionally Solidified Nickel-Based Superalloy GTD-111 [Volume 1, Issue 2, 2017, Pages 109-120]
Varahram, Nasser The Effect of Withdrawal Rate on the Microstructure of Ni-based Superalloy GTD-111 through the Directional Solidification [Volume 4, Issue 4, 2021, Pages 237-246]
Varmazyar, Sadegh Effects of Cooling Rate after Homogenizing on the Microstructure and Tensile Properties of a New Generation Cobalt Base Superalloy [Volume 8, Issue 2, 2024, Pages 89-97]
Vignesh Ramalingam, Vaira Thermal Simulation of Laser Cladding Process of High Entropy Alloy TiNiCrMoW-ZrB2 Coating on IN738 Superalloy [Volume 9, Issue 2, 2025]
Y
Yari Dehkaboudi, Ali Optimum design of sprue well using computer simulation and experimental study [Volume 4, Issue 2, 2020, Pages 119-126]
Yazdi, Ashkan Effect of Austempering Time and Temperature on the Microstructure and Hardness of Bainitic Silicon Steel [Volume 1, Issue 2, 2017, Pages 79-87]
Yousefi, Dorsa Non-linear Standard Model for Optimization of Charge Materials in Crucible and Induction Melting Furnaces [Volume 5, Issue 2, 2021, Pages 107-118]
Yousefi, Fatemeh An Investigation on the Effect of Mn on the Castability of Hypoeutectic Al-2Ni-xMn Alloys [Volume 1, Issue 2, 2017, Pages 69-78]
Yousefi, Fatemeh Investigation of microstructure and mechanical properties of Al-2Ni-xMn alloys as substitute for hypoeutectic Al-4Ni alloy [Volume 5, Issue 1, 2021, Pages 51-62]
Yousefi Bonab, Seyyed Sadra Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Alloy [Volume 1, Issue 3, 2018, Pages 193-200]
Yousefi Bonab, Seyyed Sadra Investigation of Microstructure and Chemical Composition of Mg-Ag-Ce-Zr Cast Alloy (QE22) [Volume 3, Issue 4, 2020, Pages 237-245]
Yousefpuor, Daniel Effect of Manganese Content on the as Cast Microstructure of Nodular Cast Iron [Volume 4, Issue 4, 2021, Pages 203-213]
Z
Zahiri, Hadi Effect of Slope Casting Parameters on the Microstructure and Mechanical Properties of AXE622 Alloy [Volume 6, Issue 2, 2022, Pages 103-112]
Zamani, Mohammad Reza Effect of Carbon Content on the Microstructure and Mechanical Properties of Hyness 25 Superalloy [Volume 4, Issue 3, 2020, Pages 137-143]
Zandi, Mohsen Effect of Stabilized Zirconia Oxide by Y2O3 and Silicon Carbide on Physical Stability of Magnesite Based Refractories [Volume 6, Issue 1, 2022, Pages 45-51]
ZEINALI, ALIREZA High-entropy alloy AlCoCrFeNi: Study and investigation of the microstructure of the alloy produced by vacuum arc remelting process [Volume 9, Issue 1, 2025]
